Airtac ACE Compact Cylinder ACE100X25BH
The AirTAC Airtac ACE Compact Cylinder ACE100X25BH is a genuine double acting ISO 21287 compact air cylinder with a Ø100mm bore and 25mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke25 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE100X25BH
This AirTAC ACE100X25BH is a double acting compact cylinder with a 100 mm bore and 25 mm stroke, delivering 3927 N of push force at 0.5 MPa. Its hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a full-length cylinder won't.
With a male rod thread (B code) and no optional -S magnet, this unit cannot accept CMSE or DMSE sensors. For a 2:1 safety margin on vertical lifting, plan for about 200 kg of real payload at 0.5 MPa, based on the 3927 N push force. The fixed TPU bumper absorbs end-of-stroke impact, but it does not hold a load if air pressure is lost.
Airtac ACE Compact Cylinder ACE100X25BH Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE100X25BH |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 25 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE100X25BH
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 100 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE100X25BH Is Used
Press Fit Station
Use the 3927 N push at 0.5 MPa to press bushings or bearings into housings on an assembly line, with the short body fitting under a guard.
Conveyor Stop Gate
Mount this cylinder to raise a stop gate on a pallet conveyor. The 25 mm stroke is enough to block a pallet, and the compact body saves space along the line.
Clamping Jig
In a welding fixture, use the ACE100X25BH to clamp sheet metal parts. The male rod thread simplifies attaching a custom clamp, and the fixed bumper prevents slamming.
Is the Airtac ACE Compact Cylinder ACE100X25BH the Right Cylinder?
For a lighter duty application, consider the ACE80X25 with 2513 N push at 0.5 MPa, or step up to the ACE125X25 with 6136 N push for heavier loads. This 100 mm bore model suits medium-to-heavy automation tasks where space is limited. Since there is no magnet, you cannot use proximity switches; if you need position sensing, order the -S version. Mounting options like FA/FB flanges or LB foot brackets bolt directly to the ISO 21287 face.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE100X25BH FAQ
At 0.5 MPa, push is 3927 N and pull is 3769.9 N. At 0.7 MPa, push is 5497.8 N and pull is 5277.9 N. The theoretical maximum force is 800.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi).
No, this model has no magnet because the -S code was not ordered. Without the optional -S magnet, CMSE or DMSE switches cannot be mounted. If you need position sensing, choose the ACE100X25S version instead.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE100X25BH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.