Airtac ACE Compact Cylinder ACE100X50SBH
The AirTAC Airtac ACE Compact Cylinder ACE100X50SBH is a genuine double acting ISO 21287 compact air cylinder with a Ø100mm bore and 50mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke50 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE100X50SBH
This AirTAC ACE100X50SBH is a double acting compact cylinder that delivers 3927 N of push force at 0.5 MPa, making it a strong choice for medium-duty automation. Its ISO 21287 short body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a longer cylinder simply will not go.
With the optional -S magnet fitted, this model works with CMSE or DMSE reed and solid-state switches for reliable position sensing. The hard-anodized aluminium body and S45C hard-chrome plated rod resist wear, while the fixed TPU bumper absorbs end-of-stroke impact. For a safe working load, plan for about 2356 N of real work at 0.5 MPa, which is roughly 240 kg of vertical lift with a 2:1 safety margin.
Airtac ACE Compact Cylinder ACE100X50SBH Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE100X50SBH |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE100X50SBH
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 100 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE100X50SBH Is Used
Press Fit Station
Use the 3927 N push force to press bushings or bearings into housings on an assembly line, with the compact body fitting under a guarding panel.
Conveyor Stop Gate
Mount this cylinder to raise a stop gate on a packaging conveyor, using the 50 mm stroke to block or release cartons reliably at speeds up to 500 mm/s.
Pallet Clamp
Clamp light pallets or fixtures on a transfer cart with the 3769.9 N pull force, benefiting from the short body that fits between frame rails.
Is the Airtac ACE Compact Cylinder ACE100X50SBH the Right Cylinder?
For lighter applications, consider the ACE80X50 with 2513 N push, or step up to the ACE125X50 for 6136 N push if you need more force. This 100 mm bore model with a 50 mm stroke is a balanced choice for pushing or lifting parts up to about 240 kg vertically with a safety factor. Since this cylinder has a male rod thread (B code), it is ready for rod-end accessories. The fitted magnet allows sensor feedback, but remember that a plain ACE does not hold its load if air pressure is lost - use a rod lock or pilot check valve for position holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE100X50SBH FAQ
At 0.5 MPa, push force is 3927 N and pull is 3769.9 N. At 0.7 MPa, push is 5497.8 N and pull is 5277.9 N. The theoretical maximum force is 800.9 kgf at 1.0 MPa. Operating pressure range is 0.15-1.0 MPa (22-145 psi).
The short body saves about 50% of the mounting length compared to an ISO 15552 profile cylinder, so it fits in tight spaces. The fixed TPU bumper absorbs end-of-stroke impact, but it does not lock or hold a load. The optional -S magnet allows CMSE or DMSE sensors for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE100X50SBH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.