Airtac ACE Compact Cylinder ACE100X90SBH
The AirTAC Airtac ACE Compact Cylinder ACE100X90SBH is a genuine double acting ISO 21287 compact air cylinder with a Ø100mm bore and 90mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke90 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE100X90SBH
This ACE100X90SBH is a double acting compact cylinder built to ISO 21287, with a 100 mm bore and a 90 mm stroke. Its hard-anodized aluminium body and S45C hard-chrome plated rod deliver a theoretical max force of 800.9 kgf, while the fixed TPU bumper at each end absorbs impact without adjustable settings.
At 0.5 MPa, this unit pushes with 3927 N and pulls with 3769.9 N, so a practical working load is about 240 kg (roughly 0.6 times the push force) for reliable operation. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, fitting into tight machine frames where a longer cylinder would not fit.
Airtac ACE Compact Cylinder ACE100X90SBH Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE100X90SBH |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3770 N |
| 0.7 MPa | 5498 N | 5278 N |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE100X90SBH
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 100 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE100X90SBH Is Used
Press Fit Station
Drive a 90 mm press stroke to insert bushings into housings on an assembly line, using the 3927 N push at 0.5 MPa to seat parts firmly.
Package Stop Gate
Actuate a stop gate on a conveyor to divert cartons, with the 90 mm stroke clearing the path and the compact body fitting under the roller bed.
Clamping Fixture
Clamp a workpiece in a CNC fixture with a 90 mm stroke, using the 3769.9 N pull to secure parts during drilling or milling operations.
Is the Airtac ACE Compact Cylinder ACE100X90SBH the Right Cylinder?
For a lighter duty, consider the ACE80X90 with 2513.3 N push at 0.5 MPa, or step up to the ACE125X90 for 6135.9 N push. This 100 mm bore model suits applications needing a strong push in a compact envelope, but remember it does not hold position when air is removed - add a rod lock or pilot check valve for load holding. The male rod thread (B) and PT port thread are ready for direct mounting, and the optional -S magnet is fitted here for CMSE or DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE100X90SBH FAQ
At 0.5 MPa, push is 3927 N and pull is 3769.9 N. At 0.7 MPa, push rises to 5497.8 N and pull to 5277.9 N. The theoretical maximum force is 800.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), with a proof pressure of 1.5 MPa (215 psi).
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits into tight jigs and guards. The fixed TPU bumper at both ends absorbs end-of-stroke impact, and the optional -S magnet (fitted here) enables CMSE or DMSE switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE100X90SBH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.