Airtac ACE Compact Cylinder ACE20X75SB
The AirTAC Airtac ACE Compact Cylinder ACE20X75SB is a genuine double acting ISO 21287 compact air cylinder with a Ø20mm bore and 75mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ20 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE20X75SB
This AirTAC ACE20X75SB is a double acting ISO 21287 compact cylinder, delivering a 157.1 N push and 117.8 N pull at 0.5 MPa. Its short, hard-anodized aluminum body saves about 50% of the mounting length of an ISO 15552 profile cylinder, fitting into tight jigs and guards where a full-length unit won't.
With the optional -S magnet fitted, this model works with CMSE or DMSE switches for position sensing. For real work, plan on about 94 N (roughly 9.6 kg) of safe vertical lift at 0.5 MPa, not the full rating, so you can match it to an actual part weight.
Airtac ACE Compact Cylinder ACE20X75SB Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE20X75SB |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø20 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 118 N |
| 0.7 MPa | 220 N | 165 N |
| Max (@1.0 MPa) | 32 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE20X75SB
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 20 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE20X75SB Is Used
Fixture Clamping
Use in a CNC fixture to clamp small aluminum parts with a 157.1 N push, where the compact body fits under a workholding table.
Sorting Gate
Actuate a diverting gate on a light conveyor line, cycling at up to 500 mm/s to push 75 mm stroke for product routing.
Label Applicator
Drive a label tamp head in a packaging machine, using the 75 mm stroke to press labels onto cartons with repeatable force.
Is the Airtac ACE Compact Cylinder ACE20X75SB the Right Cylinder?
For lighter automation, the ACE16X75 offers a 100.5 N push, while stepping up to the ACE25X75 gives you 245.4 N push at 0.5 MPa. This 20 mm bore is a balanced choice for medium-duty push applications. The male rod thread (B code) simplifies mounting with rod-end accessories, and the M5x0.8 port suits small-bore air lines. Since this model carries the -S magnet, you can add CMSE or DMSE sensors for stroke confirmation, but remember a plain ACE does not hold its load if air pressure is lost.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE20X75SB FAQ
At 0.5 MPa, the push force is 157.1 N and the pull is 117.8 N. At 0.7 MPa, push rises to 219.9 N and pull to 164.9 N. The theoretical maximum force is 32 kgf at 1.0 MPa.
It follows ISO 21287, so its body is about 50% shorter than an ISO 15552 profile cylinder. This saves space in tight fixtures. It has a fixed TPU bumper at both ends, not an adjustable air cushion, and the optional -S magnet enables CMSE or DMSE switches for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE20X75SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.