Airtac ACE Compact Cylinder ACE32X110S
The AirTAC Airtac ACE Compact Cylinder ACE32X110S is a genuine double acting ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE32X110S
This ACE32X110S is a double acting ISO 21287 compact cylinder that extends and retracts with air, delivering 402.1 N of push force at 0.5 MPa. Its hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a full-length cylinder will not.
With the optional -S magnet fitted, this model accepts CMSE or DMSE reed and solid-state switches for reliable position sensing. For a real-world load, plan on roughly 24.6 kg of safe vertical lifting at 0.5 MPa (402.1 N divided by 9.81, then halved for a 2:1 safety margin), making it a practical choice for light assembly presses and clamping fixtures.
Airtac ACE Compact Cylinder ACE32X110S Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE32X110S |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE32X110S
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE32X110S Is Used
Fixture Clamping
Ideal for clamping small parts in a CNC vise or workholding fixture, where the 402.1 N push force holds components securely during drilling or tapping operations.
Sorting Gate
Use on a conveyor sorting gate to divert lightweight boxes or packages, with the 110 mm stroke providing enough travel to change the flow direction in a compact space.
Light Press
Mount in a small arbor press or staking fixture for pressing bearings or inserting pins, where the 345.6 N pull force retracts the tool quickly after each cycle.
Is the Airtac ACE Compact Cylinder ACE32X110S the Right Cylinder?
When sizing, compare this 32 mm bore against a 25 mm bore (245.4 N push) for lighter duty or a 40 mm bore (628.3 N push) for more force. The 110 mm stroke suits short-travel applications, and the 1/8" port matches standard fittings for compact valves. Since the magnet is fitted, you can add CMSE or DMSE switches to confirm rod position, but remember this cylinder does not hold a load when air is removed - use a rod lock or pilot check valve for that.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE32X110S FAQ
At 0.5 MPa, push force is 402.1 N and pull force is 345.6 N. At 0.7 MPa, push force is 563 N and pull force is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. These values are based on the 32 mm bore and 12 mm rod.
The body is about 50% shorter than an ISO 15552 profile cylinder, so it saves valuable space in tight jigs and guards. It uses a fixed TPU bumper at both ends to absorb end-of-stroke impact, and the optional -S magnet (fitted here) allows CMSE or DMSE switches to detect rod position. Mounting options like FA/FB flanges or LB foot brackets bolt directly to the ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE32X110S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.