Airtac ACE Compact Cylinder ACE32X175B
The AirTAC Airtac ACE Compact Cylinder ACE32X175B is a genuine double acting ISO 21287 compact air cylinder with a Ø32mm bore and 175mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE32X175B
This AirTAC ACE32X175B is a double acting compact cylinder with a 32 mm bore and a 175 mm stroke, delivering 402.1 N of push force at 0.5 MPa. Its hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, fitting into tight machine frames where a full-length unit won't go.
The S45C piston rod is hard-chrome plated and has a male thread (B code) for direct coupling. With a fixed TPU bumper at both ends, it absorbs energy at stroke limits, but it does not lock or hold a load. For a safe working load, plan for about 241 N (roughly 24.6 kg) of real work at 0.5 MPa, not the full rating, to ensure reliable operation.
Airtac ACE Compact Cylinder ACE32X175B Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE32X175B |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE32X175B
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE32X175B Is Used
Fixture Clamping
Use the 402.1 N push force at 0.5 MPa to clamp small parts in a CNC vise or workholding fixture, where the compact body fits under a machine guard.
Carton Ejection
In a packaging line, this cylinder can push finished cartons off a conveyor onto a chute, with the 175 mm stroke clearing the full product width.
Guard Door Stop
Mount it inside a machine enclosure to hold a safety guard door open during maintenance, relying on the fixed TPU bumper to soften the stop at full extension.
Is the Airtac ACE Compact Cylinder ACE32X175B the Right Cylinder?
Compare this 32 mm bore unit to a smaller 25 mm bore ACE25X175, which pushes 245.4 N at 0.5 MPa, or step up to a 40 mm bore ACE40X175 for 628.3 N of push force. The 175 mm stroke is within the 200 mm standard maximum for this bore, so no special order is needed.
With a 1/8" port and PT thread, this cylinder is ready for standard fittings. Since there is no -S code, this unit has no magnet, so CMSE or DMSE sensors cannot be mounted; order the optional -S version if you need position sensing. The male rod thread simplifies mounting with rod end accessories.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE32X175B FAQ
At 0.5 MPa, the push force is 402.1 N and the pull force is 345.6 N. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a proof pressure of 1.5 MPa (215 psi).
It's an ISO 21287 compact cylinder, so its body is about 50% shorter than an ISO 15552 profile cylinder, saving space in tight installations. This unit has no magnet because the -S option was not ordered, so CMSE or DMSE switches cannot be used; you'd need the -S version for sensor mounting. The fixed TPU bumper at both ends handles end-of-stroke impact.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE32X175B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.