Airtac ACE Compact Cylinder ACE32X35S
The AirTAC Airtac ACE Compact Cylinder ACE32X35S is a genuine double acting ISO 21287 compact air cylinder with a Ø32mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE32X35S
This AirTAC ACE32X35S is a double acting compact cylinder that delivers 402.1 N of push force at 0.5 MPa, making it a solid choice for light assembly tasks. Its 35 mm stroke suits short-travel indexing and clamping operations where space is tight.
The ISO 21287 body is about 50% shorter than an ISO 15552 profile cylinder, so it slips into compact jigs and guarded zones. The optional -S magnet is fitted here, allowing CMSE or DMSE switches to confirm rod position, and the fixed TPU bumper absorbs end-of-stroke impact. For a 2:1 safety margin, plan to lift about 20 kg vertically with this bore at 0.5 MPa.
Airtac ACE Compact Cylinder ACE32X35S Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE32X35S |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE32X35S
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE32X35S Is Used
Fixture Clamping
Use in a CNC fixture to clamp small aluminum parts with 402.1 N force at 0.5 MPa, ensuring repeatable positioning during milling.
Carton Tabbing
Drive a tab-folding mechanism on a packaging line, where the 35 mm stroke cycles at up to 500 mm/s to keep pace with carton flow.
Guard Door Interlock
Activate a safety interlock on a machine guard, using the compact body to fit within the guard frame and the magnet to signal door status.
Is the Airtac ACE Compact Cylinder ACE32X35S the Right Cylinder?
For lighter work, the ACE25X35 offers 245.4 N push at 0.5 MPa, while the ACE40X35 provides 628.3 N push if you need more force. This 32 mm bore balances compact size with practical thrust for medium-duty automation.
Since the magnet is fitted, you can mount CMSE or DMSE sensors for position feedback. The 1/8" port and M8x1.25 female rod thread match standard fittings. Remember, this cylinder does not hold position when air is removed, so add a pilot check valve for load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE32X35S FAQ
At 0.5 MPa, push is 402.1 N and pull is 345.6 N. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. Operating pressure range is 0.15-1.0 MPa (22-145 psi).
The short body saves about 50% of the mounting length compared to an ISO 15552 profile cylinder, allowing installation in tight spaces. It features a fixed TPU bumper at both ends for impact absorption, and the optional -S magnet enables CMSE or DMSE switch mounting for position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE32X35S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.