Airtac ACE Compact Cylinder ACE32X80SB
The AirTAC Airtac ACE Compact Cylinder ACE32X80SB is a genuine double acting ISO 21287 compact air cylinder with a Ø32mm bore and 80mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke80 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE32X80SB
This AirTAC ACE32X80SB is a double acting ISO 21287 compact cylinder, with air extending and retracting the 12 mm rod. It delivers 402.1 N push and 345.6 N pull at 0.5 MPa, and 563 N push at 0.7 MPa, with a theoretical maximum of 82 kgf at 1.0 MPa.
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits into tight jigs and guards where a full-length unit will not. The optional -S magnet is fitted here, enabling CMSE or DMSE reed and solid-state switches for position sensing. For real work, plan for about 241 N (roughly 0.6 times the 0.5 MPa push force), which lifts about 24.6 kg vertically with a 2:1 safety margin.
Airtac ACE Compact Cylinder ACE32X80SB Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE32X80SB |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE32X80SB
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE32X80SB Is Used
Fixture Clamping
Clamp small parts in a CNC fixture with 402.1 N force at 0.5 MPa, using the compact body to fit under the machine guard.
Conveyor Stop Gate
Actuate a stop gate on a packaging conveyor, with the 80 mm stroke providing quick extension and retraction at speeds up to 500 mm/s.
Assembly Press
Press bearings into housings in a benchtop assembly station, relying on the 563 N push at 0.7 MPa for consistent insertion.
Is the Airtac ACE Compact Cylinder ACE32X80SB the Right Cylinder?
For a lighter duty, the ACE25X80 offers 245.4 N push at 0.5 MPa, while stepping up to the ACE40X80 gives 628.3 N push. With the 80 mm stroke and 1/8" port, this model suits medium-force automation. The male rod thread (B) simplifies attachment, and the fitted magnet allows direct mounting of CMSE or DMSE switches. Remember, this cylinder does not hold position when air is lost; use a rod lock or pilot check valve for load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE32X80SB FAQ
At 0.5 MPa, push is 402.1 N and pull is 345.6 N. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. Operating pressure range is 0.15-1.0 MPa (22-145 psi).
The magnet is an optional -S feature, and this model includes it. With the magnet, you can mount CMSE or DMSE reed or solid-state switches. Without the -S code, no magnet is present, so sensors cannot be used.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE32X80SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.