Airtac ACE Compact Cylinder ACE32X90
The AirTAC Airtac ACE Compact Cylinder ACE32X90 is a genuine double acting ISO 21287 compact air cylinder with a Ø32mm bore and 90mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke90 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE32X90
This AirTAC ACE32X90 is a double acting compact cylinder built to ISO 21287, with a 32 mm bore and 90 mm stroke. Its hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, so it fits tight jigs and guards where a full-length unit will not.
At 0.5 MPa it pushes 402.1 N and pulls 345.6 N, enough to lift about 24 kg vertically with a 2:1 safety margin. The fixed TPU bumper at both ends absorbs end-of-stroke energy, and the optional -S magnet is required before any CMSE or DMSE sensor can be fitted.
Airtac ACE Compact Cylinder ACE32X90 Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE32X90 |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE32X90
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE32X90 Is Used
Jig Clamping
Clamp small parts in a CNC fixture where the 402.1 N push at 0.5 MPa holds a bracket steady during drilling, and the short body clears the spindle guard.
Carton Tabbing
Push a glue tab into place on a folding carton line, using the 90 mm stroke to reach into a narrow guide rail without extra mounting length.
Stop Gate
Act as a stop gate on a light conveyor, extending to block a tote and retracting to let it pass, with the TPU bumper softening each cycle at 30-500 mm/s.
Is the Airtac ACE Compact Cylinder ACE32X90 the Right Cylinder?
For lighter work, the ACE25X90 pushes 245.4 N at 0.5 MPa, while the ACE40X90 pushes 628.3 N if you need more force. This 32 mm bore is a middle ground for compact automation, and the 90 mm stroke stays within the 200 mm maximum standard stroke for this bore.
Since this model has no -S code, there is no magnet fitted, so plan for CMSE or DMSE sensors only if you order the optional -S version. Mount with FA/FB flange, LB foot, CA/CB clevis, or SDB pivot brackets that bolt to the ISO 21287 face.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE32X90 FAQ
At 0.5 MPa, push is 402.1 N and pull is 345.6 N. At 0.7 MPa, push rises to 563 N and pull to 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), with proof pressure at 1.5 MPa (215 psi).
The ISO 21287 compact design saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight spaces. Sensors like CMSE or DMSE require the optional -S magnet, which is not fitted on this standard model, so order the -S code if you need position sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE32X90
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.