Airtac ACE Compact Cylinder ACE32X90SH
The AirTAC Airtac ACE Compact Cylinder ACE32X90SH is a genuine double acting ISO 21287 compact air cylinder with a Ø32mm bore and 90mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke90 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE32X90SH
This AirTAC ACE32X90SH is a double acting compact cylinder with a 32 mm bore and 90 mm stroke, delivering 402.1 N push and 345.6 N pull at 0.5 MPa. Its ISO 21287 short body takes up about 50% less mounting length than an ISO 15552 profile cylinder, so it fits into tight jigs and guards where a full-length unit will not.
With the optional -S magnet already fitted, this model works with CMSE or DMSE reed and solid-state switches for reliable position sensing. For real work, plan on about 241 N (0.6 x 402.1 N) as a safe load at 0.5 MPa, or roughly 24.6 kg of vertical lift with a 2:1 margin, so you can match it to an actual part weight.
Airtac ACE Compact Cylinder ACE32X90SH Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE32X90SH |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE32X90SH
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE32X90SH Is Used
Fixture Clamping
Clamp small parts in a CNC fixture with 402.1 N push at 0.5 MPa. The compact body fits between vise jaws, and the fitted magnet lets a CMSE switch confirm the clamp is closed.
Label Applicator
Drive a label applicator head on a packaging line. The 90 mm stroke and 345.6 N pull retract the head quickly, while the short body saves space above the conveyor.
Test Rig Actuator
Use in a small test rig to push a probe against a component. The 563 N push at 0.7 MPa provides extra force when needed, and the TPU bumper absorbs end-of-stroke impact.
Is the Airtac ACE Compact Cylinder ACE32X90SH the Right Cylinder?
For a lighter duty, the ACE25X90 offers 245.4 N push at 0.5 MPa, while stepping up to the ACE40X90 gives 628.3 N push for heavier loads. This ACE32X90SH suits medium-force automation where space is tight and sensor feedback is needed. Since the magnet is fitted, pair it with CMSE or DMSE switches; for mounting, choose FA/FB flange, LB foot, CA/CB clevis, or SDB pivot brackets. Remember, this cylinder does not hold its position if air pressure is lost - use a rod lock or pilot check valve for load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE32X90SH FAQ
At 0.5 MPa, push is 402.1 N and pull is 345.6 N. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), with proof pressure at 1.5 MPa (215 psi).
The ACE32X90SH body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight spaces. It has a fixed TPU bumper at both ends for deceleration, and the optional -S magnet allows CMSE or DMSE switches for position sensing. Mounting options include FA/FB flange, LB foot, CA/CB clevis, and SDB pivot.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE32X90SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.