
The AirTAC ACE Compact Cylinder ACE50X10S is a genuine double acting ISO 21287 compact air cylinder with a Ø50mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
This AirTAC ACE50X10S is a double acting ISO 21287 compact cylinder that delivers 981.7 N of push force at 0.5 MPa, making it a solid choice for medium-duty automation tasks. Its short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a full-length unit will not.
With a 10 mm stroke, this model is built for short, precise movements, and the fixed TPU bumper at each end absorbs impact to protect the mechanism. The optional -S magnet is fitted here, enabling CMSE or DMSE reed and solid-state switches for reliable position sensing.
| Model | Airtac ACE Compact Cylinder ACE50X10S |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 50 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Use this ACE50X10S in a pneumatic clamp for holding sheet metal parts during spot welding, where the 10 mm stroke provides quick, firm pressure with 981.7 N force at 0.5 MPa.
Mount this cylinder on a conveyor line to raise a stop gate that blocks cartons for barcode scanning, relying on the compact body to fit under the roller bed and the magnet for position feedback.
In an assembly jig for automotive brackets, this cylinder extends an alignment pin by 10 mm to locate parts precisely before bolting, with the fixed TPU bumper preventing shock at the end of travel.
When sizing this ACE50X10S, consider that a smaller 40 mm bore cylinder provides 628.3 N push at 0.5 MPa, while a larger 63 mm bore offers 1558.6 N, so this 50 mm unit sits in the middle for moderate force needs. The 10 mm stroke is ideal for short indexing or pressing actions, but remember that a plain ACE cylinder does not hold its position if air pressure is lost, so add a rod lock or pilot check valve for load holding.
For mounting, the ISO 21287 face accepts FA/FB flanges, LB foot brackets, CA/CB clevises, and SDB pivots, letting you drop it into standard fixtures. Since the magnet is fitted, you can attach CMSE or DMSE sensors to confirm rod position, which is useful for automated cycle control.
AirtacDistr lists every ACE50 order code with its price on one page at https://airtacdistr.com/products/airtac-ace50-compact-air-cylinder
Quick checklist
At 0.5 MPa, this cylinder delivers 981.7 N push and 881.2 N pull. At 0.7 MPa, push is 1374.4 N and pull is 1233.7 N. The theoretical maximum force is 200.2 kgf at 1.0 MPa. It operates from 0.15 to 1.0 MPa (22-145 psi) and has a proof pressure of 1.5 MPa (215 psi).
The ACE50X10S has a short body that is about 50% shorter than an ISO 15552 profile cylinder, so it saves valuable space in tight jigs and guards. It uses a fixed TPU bumper at both ends to absorb impact, and the optional -S magnet allows CMSE or DMSE sensors for position detection. The hard-anodized aluminium body and hard-chrome plated S45C rod ensure durability in demanding environments.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.