
The AirTAC ACE Compact Cylinder ACE50X110S is a genuine double acting ISO 21287 compact air cylinder with a Ø50mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
This AirTAC ACE50X110S is a double acting ISO 21287 compact cylinder with a 50 mm bore and 110 mm stroke, delivering 981.7 N of push force at 0.5 MPa. Its hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, letting it fit into tight machine frames and guarding where a full-length cylinder won't.
The optional -S magnet is fitted on this model, so you can mount CMSE or DMSE reed and solid-state switches for position sensing. The S45C hard-chrome rod and roller-burnished bore provide long service in cyclic automation.
| Model | Airtac ACE Compact Cylinder ACE50X110S |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 50 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (double rod, adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Use in a CNC machine fixture to clamp a 50 kg workpiece with 981.7 N push at 0.5 MPa, holding it securely during drilling or milling operations.
In a packaging line, this cylinder pushes finished cartons off a conveyor at 110 mm stroke, with enough force to move boxes up to 60 kg safely.
Actuate a diverter gate in a warehouse sortation system, using the 50 mm bore to redirect parcels weighing up to 60 kg at speeds up to 500 mm/s.
Choose this 50 mm bore when you need about 981.7 N of push at 0.5 MPa. If your load is lighter, a 40 mm bore delivers 628.3 N push at 0.5 MPa and saves space; for heavier work, a 63 mm bore gives 1558.6 N push at 0.5 MPa. The 110 mm stroke is within the 250 mm standard maximum for this bore, so no special order is needed.
Since this model carries the -S magnet, you can add CMSE or DMSE sensors for end-of-stroke detection. For mounting, use FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, or FTC brackets that bolt to the ISO 21287 face. Remember, a plain ACE does not hold its position if air pressure is lost; use a rod lock or pilot check valve for load holding.
AirtacDistr lists every ACE50 order code with its price on one page at https://airtacdistr.com/products/airtac-ace50-compact-air-cylinder
Quick checklist
At 0.5 MPa, push force is 981.7 N and pull force is 881.2 N. At 0.7 MPa, push is 1374.4 N and pull is 1233.7 N. The theoretical maximum force is 200.2 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), and speed range is 30-500 mm/s.
The magnet is an optional -S feature, and this model includes it, so you can mount CMSE or DMSE reed or solid-state switches for position sensing. Without the -S code, no magnet is present. The cylinder has a fixed TPU bumper at both ends, not an adjustable cushion, and it does not lock or hold a load when air is removed.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.