Airtac ACE Compact Cylinder ACE50X200
The AirTAC Airtac ACE Compact Cylinder ACE50X200 is a genuine double acting ISO 21287 compact air cylinder with a Ø50mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ50 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE50X200
This AirTAC ACE50X200 is a double acting compact cylinder that extends and retracts its 16 mm rod with air pressure, delivering a solid 981.7 N push force at 0.5 MPa for your automation tasks. The hard-anodized aluminium body keeps the unit light while the S45C hard-chrome rod resists wear, and the fixed TPU bumper at each end softens the stop.
Because the ISO 21287 body is about 50% shorter than an ISO 15552 profile cylinder, it slides into tight spaces on packaging lines or robotic cells where a full-length unit won't fit. With a 200 mm stroke and a 1/8" port, it suits moderate-speed applications, and you can plan for roughly 60 kg of safe working load at 0.5 MPa, which is about 0.6 times the rated push force.
Airtac ACE Compact Cylinder ACE50X200 Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE50X200 |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE50X200
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 50 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE50X200 Is Used
Jig Clamping
Use the ACE50X200 to clamp sheet metal parts in a welding fixture, where the 981.7 N push at 0.5 MPa holds the workpiece firmly and the compact body fits under a workbench.
Conveyor Stop Gate
Mount this cylinder on a packaging conveyor to raise a stop gate that diverts boxes. The 200 mm stroke lifts the gate fully clear, and the 881.2 N pull retracts it quickly for smooth flow.
Press Feed Mechanism
In a small stamping press, this cylinder pushes a slide to feed blanks into the die area. The 1374.4 N push at 0.7 MPa gives extra force for heavier parts, and the short body reduces the machine footprint.
Is the Airtac ACE Compact Cylinder ACE50X200 the Right Cylinder?
For a lighter duty, consider the ACE40X200 with a 628.3 N push at 0.5 MPa, or step up to the ACE63X200 for 1558.6 N push at the same pressure. This 50 mm bore model balances force and size, but remember it does not hold its position if air pressure is lost, so add a rod lock or pilot check valve for vertical loads. The 1/8" port matches standard fittings, and if you need sensor feedback, order the -S version to get the optional magnet for CMSE or DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE50X200 FAQ
At 0.5 MPa, the push force is 981.7 N and the pull force is 881.2 N. At 0.7 MPa, push is 1374.4 N and pull is 1233.7 N. The theoretical maximum force is 200.2 kgf at 1.0 MPa.
Yes, it is an ISO 21287 compact cylinder with a body about 50% shorter than an ISO 15552 profile cylinder. The magnet is optional, so you must order the -S code to fit CMSE or DMSE switches; without -S, no sensor can be mounted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE50X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.