Airtac ACE Compact Cylinder ACE80X80S
The AirTAC Airtac ACE Compact Cylinder ACE80X80S is a genuine double acting ISO 21287 compact air cylinder with a Ø80mm bore and 80mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke80 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE80X80S
This AirTAC ACE80X80S is a double acting ISO 21287 compact cylinder with an 80 mm bore and 80 mm stroke, delivering 2513.3 N of push force at 0.5 MPa. Its short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits into tight machine frames where a full-length cylinder won't. The hard-anodized aluminium body and S45C hard-chrome rod resist wear in continuous cycling.
With the optional -S magnet fitted, this model accepts CMSE or DMSE reed and solid-state switches for reliable end-of-stroke sensing. For a real-world load, plan on about 1508 N (0.6 times the 0.5 MPa push) as a safe working capacity, or roughly 154 kg of vertical lift with a 2:1 safety margin. The fixed TPU bumper at both ends absorbs impact, and the 1/4" port suits standard industrial air lines.
Airtac ACE Compact Cylinder ACE80X80S Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE80X80S |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE80X80S
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE80X80S Is Used
CNC Fixture Clamping
Clamp small to medium workpieces on a CNC mill table with 2513.3 N push force at 0.5 MPa, using the compact body to fit under guards.
Carton Ejection
Eject filled cartons from a packaging line conveyor at speeds up to 500 mm/s, with the fixed TPU bumper absorbing end-of-stroke shock.
Sorting Gate Actuator
Divert parcels on a warehouse sorting conveyor with the 80 mm stroke, using the optional -S magnet for position feedback to the PLC.
Is the Airtac ACE Compact Cylinder ACE80X80S the Right Cylinder?
For lighter duty in the same footprint, consider the ACE63X80S with 1558.6 N push at 0.5 MPa, or step up to the ACE100X80S for 3927.0 N push if your application needs more force. This 80 mm bore model balances power and size, and the optional magnet enables position sensing with CMSE or DMSE switches. Mounting options include FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, and FTC brackets, all compatible with the ISO 21287 face. Remember, this cylinder is double acting and does not hold its position when air pressure is lost; add a rod lock or pilot check valve for load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE80X80S FAQ
At 0.5 MPa, push force is 2513.3 N and pull force is 2356.2 N. At 0.7 MPa, push is 3518.6 N and pull is 3298.7 N. The theoretical maximum force is 512.6 kgf at 1.0 MPa.
Yes, the ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, making it ideal for tight jigs. It has a fixed TPU bumper at both ends, not an adjustable cushion, and operates at speeds from 30 to 500 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE80X80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.