Airtac ACE Compact Cylinder ACE80X80SB
The AirTAC Airtac ACE Compact Cylinder ACE80X80SB is a genuine double acting ISO 21287 compact air cylinder with a Ø80mm bore and 80mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke80 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE80X80SB
This AirTAC ACE80X80SB is a double acting compact cylinder that uses air to both extend and retract its 20 mm rod. Its 80 mm bore delivers 2513.3 N of push force and 2356.2 N of pull force at 0.5 MPa, making it a strong choice for mid-size automation tasks. The hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, which lets you fit it into tight machine guards and gantries where a full-length cylinder will not work.
The body is threaded together for easy service, and the S45C carbon-steel rod has a hard-chrome finish for wear resistance. This model includes the optional -S magnet, so you can mount CMSE or DMSE reed and solid-state switches to confirm piston position. With a 0.5 MPa supply, plan for a usable working load of about 1508 N, which is roughly 153.7 kgf, so it can comfortably lift a 150 kg part vertically with a 2:1 safety margin. A fixed TPU bumper at each end absorbs impact energy, and the operating speed range is 30-500 mm/s.
Airtac ACE Compact Cylinder ACE80X80SB Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE80X80SB |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE80X80SB
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE80X80SB Is Used
Jig Clamping
Use the 2513.3 N push force to clamp sheet metal parts in a welding fixture, holding them steady for precise tack welds.
Sorting Gate
Actuate a diverter gate on a packaging conveyor, using the 80 mm stroke to push cartons onto a secondary lane at speeds up to 500 mm/s.
Press Guard Interlock
Drive a safety guard interlock on a small stamping press, where the short ISO 21287 body fits within the machine frame and the magnet signals the guard is closed.
Is the Airtac ACE Compact Cylinder ACE80X80SB the Right Cylinder?
For lighter duty in a smaller envelope, consider the ACE63X80 with 1558.6 N push force at 0.5 MPa, or step up to the ACE100X80 for 3927.0 N push force if you need more muscle. This ACE80X80SB has a 1/4" port and a male rod thread, which simplifies mounting in many jigs. The optional -S magnet is already fitted here, so you can add CMSE or DMSE sensors for position feedback. Remember that this is a double acting cylinder, so it will not hold its position if air pressure is lost; use a rod lock or pilot check valve for load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE80X80SB FAQ
At 0.5 MPa, the push force is 2513.3 N and the pull force is 2356.2 N. At 0.7 MPa, push is 3518.6 N and pull is 3298.7 N. The theoretical maximum force is 512.6 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa (22-145 psi).
The ACE80X80SB has a hard-anodized aluminium body that is about 50% shorter than an ISO 15552 profile cylinder, so it fits in tight spaces. It has a fixed TPU bumper at both ends to absorb impact, and this model includes the optional -S magnet for use with CMSE or DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE80X80SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.