Airtac ACE Compact Cylinder ACE80X90B
The AirTAC Airtac ACE Compact Cylinder ACE80X90B is a genuine double acting ISO 21287 compact air cylinder with a Ø80mm bore and 90mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke90 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE80X90B
This AirTAC ACE80X90B is a double acting ISO 21287 compact cylinder with an 80 mm bore and a 90 mm stroke, delivering 2513.3 N of push force at 0.5 MPa. Its hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, saving valuable space in tight automation cells and machine guarding.
With a male rod thread (B code) and a 1/4" port, it is ready for direct linkage to tooling. The fixed TPU bumper at both ends absorbs end-of-stroke energy, but it does not lock or hold a load; for vertical lifting, plan for a safe working load of about 154 kg (0.6 x 2513.3 N / 9.81) to maintain a 2:1 safety margin.
Airtac ACE Compact Cylinder ACE80X90B Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE80X90B |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE80X90B
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE80X90B Is Used
CNC Door Clamp
Use the 2513.3 N push force to clamp a CNC machine's sliding door against a stop, with the compact body fitting inside the guard frame.
Carton Ejector
In a packaging line, this cylinder's 90 mm stroke pushes finished cartons off a conveyor onto a pallet, with the 2356.2 N pull retracting the rod quickly.
Pallet Stops
Mount this cylinder on a conveyor to raise a pallet stop. The 2513.3 N push holds the pallet in place during accumulation, and the fixed TPU bumper reduces impact noise.
Is the Airtac ACE Compact Cylinder ACE80X90B the Right Cylinder?
When sizing, compare this 80 mm bore to the 63 mm bore (1558.6 N push at 0.5 MPa) if you need less force, or step up to the 100 mm bore (3927.0 N push at 0.5 MPa) for heavier work. The 90 mm stroke is within the 300 mm standard maximum, so no custom stroke is required. This model has no magnet, so CMSE or DMSE sensors cannot be fitted; order the -S option if you need position sensing. Mounting options include FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, and FTC brackets.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE80X90B FAQ
At 0.5 MPa, push is 2513.3 N and pull is 2356.2 N. At 0.7 MPa, push is 3518.6 N and pull is 3298.7 N. The theoretical maximum force is 512.6 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa (22-145 psi), with a proof pressure of 1.5 MPa (215 psi).
Yes, it is an ISO 21287 compact cylinder, with a body about 50% shorter than an ISO 15552 profile cylinder. However, this model has no magnet, so you cannot mount CMSE or DMSE sensors. To use sensors, you must order the -S option for a built-in magnet. The fixed TPU bumper at both ends absorbs end-of-stroke energy but does not provide adjustable cushioning or load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE80X90B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.