Airtac ACED Double-acting Compact Cylinder ACED80X90
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X90 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 90mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke90 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
About the Airtac ACED Double-acting Compact Cylinder ACED80X90
A double acting compact cylinder built to ISO 21287, the ACED80X90 pushes a 20 mm rod out of BOTH covers, so thrust is identical on every stroke: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, equal in both directions because both sides of the piston see the rod-side area. The hard-anodized aluminium body carries a roller-burnished bore, the S45C rod is hard-chrome plated, and a fixed TPU bumper sits at each end to soften the stroke ends.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this 80 mm bore fits guarded gantries and press fixtures where a full-length body cannot. In practice, plan on roughly 1414 N of usable work at 0.5 MPa, and for vertical duty the rod side lifts about 120 kg with a 2:1 margin. The through-rod resists rotation and side load, and the rear rod can carry a sensor flag; add the optional -S magnet if you want CMSE or DMSE switches, since without -S no magnet is fitted.
Airtac ACED Double-acting Compact Cylinder ACED80X90 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X90 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 90 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X90
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X90 Is Used
Press fixture clamping
The symmetric 2356.2 N at 0.5 MPa clamps steel brackets in welding fixtures with equal force on clamp and release, and the 90 mm stroke clears part loading.
Gantry lift-and-lower
With about 120 kg of vertical lift at a 2:1 margin, the double rod guides a small pallet elevator between two stations without a separate guide post.
Two-sided indexing
A rod on each cover lets one cylinder push a sliding conveyor stopper forward and pull it back with identical force, keeping cycle timing symmetric at 30-500 mm/s.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X90 the Right Cylinder?
Step down to ACED63X90 (1458.1 N at 0.5 MPa) for lighter clamping, or step up to ACED100X90 (3769.9 N) when the load demands more. Remember this is not a position holder: if air is lost the piston drifts, so specify a rod lock or pilot check for held loads. FA/FB flanges, LB feet and FTC brackets bolt to the ISO 21287 face, and I/Y rod knuckles suit the 20 mm rod; order the -S code only if CMSE/DMSE sensing is needed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X90 FAQ
Output is equal in both directions because a rod exits both covers: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, with a maximum of 480.5 kgf at 1.0 MPa. As a rule of thumb, count on about 1414 N of real work at 0.5 MPa, which corresponds to lifting roughly 120 kg vertically with a 2:1 margin. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and FA/FB flanges, LB feet or FTC brackets bolt straight to its face. The end-of-stroke deceleration comes from a fixed TPU bumper at each cover. Position sensing requires the optional -S magnet code: only then can CMSE or DMSE switches be mounted in the body slots. This unit has no magnet fitted, and it does not hold position if air is lost - use a rod lock or pilot check for that.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X90
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.