Airtac ACED Double-acting Compact Cylinder ACED80X90S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED80X90S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø80mm bore and 90mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke90 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
About the Airtac ACED Double-acting Compact Cylinder ACED80X90S
A double acting, double-rod compact cylinder built to ISO 21287, the ACED80X90S pushes a 20 mm rod out of BOTH covers, so thrust is identical on each stroke: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa. The 80 mm bore runs on 0.15-1.0 MPa (22-145 psi) filtered air at 30-500 mm/s, with a fixed TPU bumper at each end to soften the stroke. The hard-anodized aluminium body carries magnet slots, and this -S model ships with the magnet fitted so CMSE / DMSE reed or solid-state switches can be clipped straight on.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits tight guards and gantry frames. The through-rod resists rotation and side load and gives a symmetric mount, while the rear rod can carry a sensor flag. At 0.5 MPa, plan on roughly 1410 N of usable work, which is about 72 kg lifted vertically with a 2:1 margin. FA/FB flanges, LB feet and FTC brackets bolt directly to the standard face; the 90 mm stroke sits well inside the 300 mm maximum standard stroke for this bore.
Airtac ACED Double-acting Compact Cylinder ACED80X90S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED80X90S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 90 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 2356 N |
| 0.7 MPa | 3299 N |
| Max (@1.0 MPa) | 481 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED80X90S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED80X90S Is Used
Bench press and staking
The symmetric 2356.2 N thrust in both directions suits staking, riveting and light press operations on fixture plates where a 90 mm closed height matters.
Reciprocating transfer slides
A rod at each end lets the through-rod drive a slide from either side or carry a sensor flag, at 30-500 mm/s on palletized conveyor tooling.
Lift-and-lower gantry posts
Equal force up and down makes this 80 mm bore a fit for vertical lift posts raising roughly 70-140 kg parts inside compact machine guards.
Is the Airtac ACED Double-acting Compact Cylinder ACED80X90S the Right Cylinder?
At 80 mm bore this model delivers 2356.2 N both ways at 0.5 MPa. Step down to a 63 mm bore (1458.1 N) for lighter press-fit or clamping work, or up to 100 mm (3769.9 N) when the load grows. The 90 mm stroke is a standard length, so no made-to-order build is needed. Remember that a plain double-rod cylinder drifts when air is lost - specify a rod lock or pilot check if the load must stay put. Female M12x1.75 rod thread, PT ports, and the fitted -S magnet for CMSE / DMSE sensing complete the package.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED80X90S FAQ
Yes - the double-rod design exposes the rod-side area on both strokes, so output is equal each way: 2356.2 N at 0.5 MPa and 3298.7 N at 0.7 MPa, with a maximum of 480.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/4" port matches the 80 mm bore.
The S in the code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches mount directly in the body slots. FA/FB flanges, LB feet and FTC brackets attach to the ISO 21287 face, and the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. A fixed TPU bumper at both ends absorbs end-of-stroke energy.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED80X90S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.