This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X160SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.

The AirTAC ACP Compact Cylinder ACP100X160SB is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 160mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X160SB (ISO 21287 ACE), in the same bore, stroke and force class.
Double acting on both strokes, the ACP100X160SB is a DIN-standard compact cylinder with a 100 mm bore and 160 mm stroke, driven by a 25 mm hard-chrome S45C rod through a 1/4" PT port. At 0.5 MPa it pushes 3927 N and pulls 3681.6 N, rising to 5497.8 N on extension at 0.7 MPa, with a theoretical ceiling of 800.9 kgf at 1.0 MPa. The S in the code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be mounted directly on the hard-anodized aluminium body.
Because the ISO 21287-class short body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, this bore size fits into presses, gantries and fixture plates where a full-length body simply will not go. Note that this model is discontinued: the current-production direct is ACE100X160, same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping.
| Model | Airtac ACP Compact Cylinder ACP100X160SB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X160SB |
| Bore size | Ø100 mm |
| Stroke | 160 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X160SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X160SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
The 3927 N push at 0.5 MPa clamps steel weldments in machining fixtures, with the 160 mm stroke clearing part loading by hand.
A short-body 100 mm bore suits bench-top marking and light pressing jigs where a full-length profile cylinder would overhang the frame.
In warehouse conveyor lines the 160 mm stroke swings heavy safety gates, and the fitted -S magnet feeds position feedback to the PLC via CMSE switches.
At this force class the 100 mm bore delivers 3927 N at 0.5 MPa; step down to a 63 mm bore (1558.6 N) for lighter clamping or up to a larger bore only if your air supply cannot sustain the flow this size demands at 30-500 mm/s. The B code gives a male 25 mm rod thread, so I/Y knuckles bolt on without adapters. Remember the piston drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. This unit is discontinued; order ACE100X160 as the current replacement and verify ISO 21287 hole patterns first.
Replacement checklist
At 0.5 MPa: 3927 N push and 3681.6 N pull. At 0.7 MPa: 5497.8 N push and 5154.2 N pull. Theoretical maximum is 800.9 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, air filtered to 40 um.
The ISO 21287-class compact body cuts mounting length by about half versus an ISO 15552 profile cylinder, and fixed TPU pads at both ends simply decelerate the piston - they never hold or brake a load, so use a rod lock or pilot check valve for held positions. FA/FB flanges, LB feet and CA/CB clevis mounts fit the standard face, and the -S magnet (fitted on this model) accepts CMSE / DMSE switches. The ACP line is discontinued; ACE100X160 is the current direct successor - confirm ISO 21287 dimensions before converting.
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X160SB replacement — usually within 7-8 hours.