This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X200SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP100X200SB
The AirTAC ACP Compact Cylinder ACP100X200SB is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 200mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X200SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ100 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → ACE100X200SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP100X200SB
Double acting on both strokes, the ACP100X200SB pairs a 100 mm bore with a 200 mm stroke and a 25 mm hard-chrome S45C rod inside a hard-anodized aluminium body. At 0.5 MPa it pushes 3927 N and pulls 3681.6 N, rising to 5497.8 N and 5154.2 N at 0.7 MPa, with a theoretical ceiling of 800.9 kgf at 1.0 MPa. The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into presses and gantries where a full-length body simply will not fit. Fixed TPU bumpers sit at both ends and speed runs 30-500 mm/s.
This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be fitted for end-of-stroke signalling, and the B code gives a male rod thread with a 1/4" PT port. Note that ACP is discontinued; the current-production direct is ACE100X200, so confirm ISO 21287 mounting dimensions before ordering.
Airtac ACP Compact Cylinder ACP100X200SB Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP100X200SB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X200SB |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X200SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X200SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP100X200SB
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP100X200SB Is Used
Pneumatic stamping press
A 100 mm bore driving a small forming or marking die on a sheet-metal line, where 3927 N at 0.5 MPa is enough for light swaging and the short body fits inside the press frame.
Pallet clamp actuator
Clamping and releasing cartons or pallets on a warehouse transfer car, using the 200 mm stroke to clear the load and the -S magnet with a DMSE switch to confirm grip.
Replacing the Airtac ACP Compact Cylinder ACP100X200SB with the ACE100X200SB
At this bore size the step either way is large: a 63 mm bore delivers 1558.6 N push at 0.5 MPa while stepping up is not possible past 100 mm in this family, so 100 mm is the top of the range and suits jobs needing near 400 kg of thrust. If the load must stay put when air is lost, add a rod lock or pilot check valve - the bumper only decelerates, it never holds. Foot (LB), flange (FA/FB) and clevis (CA/CB) mounts bolt to the standard face, and the 200 mm stroke sits inside the 300 mm maximum standard stroke for this bore. Since ACP is discontinued, order ACE100X200 as the current equivalent and verify the ISO 21287 hole pattern first.
Replacement checklist
- ✓ Current-production ACE → ACE100X200SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP100X200SB FAQ
At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa push is 5497.8 N and pull 5154.2 N, with a theoretical maximum of 800.9 kgf at 1.0 MPa. It is a double acting compact cylinder, 100 mm bore, 200 mm stroke, 25 mm rod, 1/4" PT port, operating on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, with a proof pressure of 1.5 MPa (215 psi), a temperature range of -20 to +70 C and a speed range of 30-500 mm/s.
Order the ACE100X200, the ISO 21287 successor made by swapping the P for an E. It matches the same bore, stroke and force class and keeps the short-body format, but because the ACP was built to a DIN standard you should confirm the ISO 21287 mounting dimensions against your fixture before swapping. This unit has the optional -S magnet fitted, so CMSE or DMSE switches will work on the ACE equivalent only if you order that version with the magnet.
Related AirTAC ACE Cylinders
Request a Quote for the ACE100X200SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X200SB replacement — usually within 7-8 hours.