This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X20S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.

The AirTAC ACP Compact Cylinder ACP100X20S is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 20mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X20S (ISO 21287 ACE), in the same bore, stroke and force class.
The ACP100X20S is a double acting DIN-standard compact cylinder with a 100 mm bore and a short 20 mm stroke, driving a 25 mm hard-chrome S45C rod from a hard-anodized aluminium body. At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa push rises to 5497.8 N, with a theoretical ceiling of 800.9 kgf at 1.0 MPa. The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses and clamping fixtures where a full-length body will not fit. Air is filtered to 40 um, pressure runs 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and a fixed TPU bumper sits at both ends.
Because the S code is in this model, the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be mounted directly on the body for end-of-stroke signalling. Note that this model is discontinued: the current-production direct is ACE100X20, same bore, stroke and force class, so confirm the ISO 21287 mounting dimensions before swapping.
| Model | Airtac ACP Compact Cylinder ACP100X20S |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X20S |
| Bore size | Ø100 mm |
| Stroke | 20 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X20S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X20S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×20 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Short-stroke 100 mm bore gives 3927 N at 0.5 MPa for swaging, staking or light pressing on aluminium brackets in a compact press frame.
The 20 mm stroke clamps machined housings in dedicated jigs, and the fitted magnet signals clamp-complete to the PLC via a DMSE switch.
Size both ways: if 3927 N of push at 0.5 MPa is more than the job needs, the ACP80X20S delivers 2513.3 N at the same stroke; if you need more, there is no larger ACP bore, so step up to a larger ACE bore. The 20 mm stroke is well inside the 300 mm maximum standard stroke for bore 100. A plain cylinder does not hold position when air is lost - the piston drifts - so for a held load add a rod lock or pilot check valve. FA/FB flange, LB foot and CA/CB clevis mounts bolt to the standard face, and the fitted -S magnet accepts CMSE / DMSE switches. Order ACE100X20 as the current replacement and verify the ISO 21287 mounting dimensions.
Replacement checklist
At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa push is 5497.8 N and pull 5154.2 N; theoretical maximum is 800.9 kgf at 1.0 MPa. Bore is 100 mm, rod 25 mm, port 1/4" PT, female rod thread M16x1.5, speed 30-500 mm/s, pressure 0.15-1.0 MPa (22-145 psi).
Order ACE100X20, the current-production ISO 21287 successor: swap the P for an E and you get the same bore, stroke and force class with a matching short body. The ACP is DIN-standard, so confirm the ISO 21287 mounting dimensions before swapping. This model carries the optional -S magnet, so CMSE / DMSE switches mount on it; the fixed TPU bumpers only decelerate at the ends and never hold a load.
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X20S replacement — usually within 7-8 hours.