This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X275, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.

The AirTAC ACP Compact Cylinder ACP100X275 is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 275mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X275 (ISO 21287 ACE), in the same bore, stroke and force class.
A double acting compact cylinder in the 100 mm bore class, the ACP100X275 delivers 3927 N of push force and 3681.6 N of pull force at 0.5 MPa, rising to 5497.8 N on the extend stroke at 0.7 MPa. Air filtered to 40 um drives the piston across a 275 mm stroke at 30-500 mm/s, with an operating window of 0.15-1.0 MPa (22-145 psi) and a proof rating of 1.5 MPa (215 psi). The 275 mm stroke sits inside the 300 mm maximum standard stroke for this bore, so it ships as a standard build.
The hard-anodized aluminium body with an S45C hard-chrome 25 mm rod keeps the short ISO 21287-style footprint, saving roughly 50% of the mounting length of an ISO 15552 profile cylinder - useful on long-stroke gantries where space is still tight. Note this model is discontinued: the current-production direct is ACE100X275, so confirm ISO 21287 mounting dimensions before swapping.
| Model | Airtac ACP Compact Cylinder ACP100X275 |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X275 |
| Bore size | Ø100 mm |
| Stroke | 275 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X275 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X275 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×275 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
The 3927 N push at 0.5 MPa ejects formed cartons or trim offal from a pallet-sized die on packaging lines, with the 275 mm stroke clearing the full fixture width.
Pull force of 3681.6 N at 0.5 MPa draws a hinged stainless lid down onto its seal before operators hand-tighten the clamps.
The long 275 mm stroke takes up belt stretch on a 20 m conveyor run, holding about 240 kg-equivalent of usable force at 0.5 MPa.
At 100 mm bore this is the largest size in the family, pushing 3927 N at 0.5 MPa where an 80 mm bore manages 2513.3 N - step down only if your load allows. There is no larger bore above 100 mm, so for more force you would parallel two cylinders or move to a different series. The 275 mm stroke is standard (max 300 mm for this bore). This unit has a female M16x1.5 rod thread and 1/4" PT ports; add the optional -S code if you need the magnet for CMSE / DMSE switches, since without -S no magnet is fitted. Keep in mind the rod drifts when air is lost - fit a rod lock or pilot check valve if the load must stay put. Order ACE100X275 as the current replacement.
Replacement checklist
At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa those rise to 5497.8 N and 5154.2 N. Theoretical maximum is 800.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), temperature -20 to +70 C, speed 30-500 mm/s, fluid air filtered to 40 um. Bore is 100 mm, stroke 275 mm, rod 25 mm with a female M16x1.5 thread and 1/4" PT ports.
No - the ACP family is discontinued. The current-production replacement is ACE100X275, which swaps the P for an E and matches the same 100 mm bore, 275 mm stroke and force class in the short ISO 21287 body. Confirm the ISO 21287 mounting dimensions against your fixture before swapping, since the ACP was built to a DIN standard. If you need position sensing, order the ACE with the optional -S magnet for CMSE / DMSE switches; the fixed TPU bumpers at both ends simply soften end-of-travel and do not hold a load when air is lost.
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X275 replacement — usually within 7-8 hours.