verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote

This model is discontinued

AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X275SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.

AirTAC ACP Series · Discontinued Compact Cylinder

Airtac ACP Compact Cylinder ACP100X275SB

The AirTAC ACP Compact Cylinder ACP100X275SB is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 275mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X275SB (ISO 21287 ACE), in the same bore, stroke and force class.

  • BoreØ100 mm
  • Stroke275 mm
  • Port size1/4"
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • StatusDiscontinued → ACE100X275SB
$380.55 $409.93Save 7% Ships as ACE100X275SB (current AirTAC replacement)
Ships as ACE100X275SB, the current AirTAC replacement (the same code under the new prefix). Order this code as usual. Your cart, checkout and order confirmation will show the ACE100X275SB we ship. View ACE100X275SB
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every ACP100 stroke, mounting and version on one page All ACP100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac ACP Compact Cylinder ACP100X275SB

A double acting compact cylinder in the 100 mm bore class, the ACP100X275SB delivers 3927 N push and 3681.6 N pull at 0.5 MPa, rising to 5497.8 N push at 0.7 MPa with a theoretical peak of 800.9 kgf at 1.0 MPa. The hard-anodized aluminium body with an S45C hard-chrome 25 mm rod keeps the short ISO 21287-class footprint, saving roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into heavy gantries and press fixtures where a full-length body will not fit. A fixed TPU bumper sits at both ends and speed runs 30-500 mm/s over 0.15-1.0 MPa (22-145 psi).

Because the S code is in this model, the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clipped on for end-of-stroke signalling without external proxies. The B code gives a male rod thread on a 1/4" PT port supply. Note this model is discontinued: the current-production direct is ACE100X275, same bore, stroke and force class, so confirm the ISO 21287 mounting dimensions before swapping.

Airtac ACP Compact Cylinder ACP100X275SB Technical Specifications

ModelAirtac ACP Compact Cylinder ACP100X275SB
SeriesACP DIN compact cylinder (discontinued)
ReplacementACE100X275SB
Bore sizeØ100 mm
Stroke275 mm
Acting typeDouble acting
Port size1/4"
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed bumper (both ends)
Max standard strokeUp to 300 mm

Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X275SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3927 N3682 N
0.7 MPa5498 N5154 N
Max (@1.0 MPa)801 kgf

The ACE100X275SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.

Model Code: Airtac ACP Compact Cylinder ACP100X275SB

ACPDIN compact cylinder (double-acting, discontinued).
100Bore size in mm.
×275Stroke length in mm.
SOptional built-in magnet for sensor position sensing (omit for no magnet).
BRod type: B = male thread; blank = female thread.

Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).

Where the Airtac ACP Compact Cylinder ACP100X275SB Is Used

precision_manufacturing

Heavy press fixture clamping

3927 N of push at 0.5 MPa clamps steel weldments in automotive fixture trees, and the short body fits between fixture plates where a full-length profile cylinder cannot.

forklift

Pallet gate actuation

The 275 mm stroke swings or lifts heavy pallet-stop gates in warehouses, with the -S magnet feeding CMSE switches to the gate interlock loop.

Replacing the Airtac ACP Compact Cylinder ACP100X275SB with the ACE100X275SB

At 100 mm bore this is the top of the ACP range: 3927 N push at 0.5 MPa where an 80 mm bore offers 2513.3 N and there is no larger standard bore, so step to a larger frame or a multi-cylinder arrangement if you need more. The 275 mm stroke sits inside the 300 mm maximum standard stroke for this bore. Plan for about 2356 N of pull-side work at 0.5 MPa and remember a plain cylinder drifts when air is lost, so add a rod lock or pilot check valve for a held load. FA/FB flange, LB foot and CA/CB clevis mount on the standard face, and the male rod thread suits I/Y knuckles. Order ACE100X275 as the current replacement and verify ISO 21287 hole patterns first.

Replacement checklist

  • ✓ Current-production ACE → ACE100X275SB
  • ✓ Same bore / stroke / force class
  • ✓ Confirm ISO 21287 mounting dimensions
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S for magnet if you need sensors
View ACE100X275SB

Airtac ACP Compact Cylinder ACP100X275SB FAQ

At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa push is 5497.8 N and pull 5154.2 N; theoretical maximum is 800.9 kgf at 1.0 MPa. It is double acting with a 25 mm rod, 1/4" PT ports, 0.15-1.0 MPa (22-145 psi) operating range and 30-500 mm/s speed.

ACP100X275SB is discontinued. The current-production replacement is ACE100X275, which keeps the same 100 mm bore, 275 mm stroke and force class in the ISO 21287 short-body family. Confirm the ISO 21287 mounting dimensions against your fixture before swapping, since the ACP followed the older DIN-standard layout.

Related AirTAC ACE Cylinders

Request a Quote for the ACE100X275SB

Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X275SB replacement — usually within 7-8 hours.

Thank you. We received your request for ACP100X275SB and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.