This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X325B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.

The AirTAC ACP Compact Cylinder ACP100X325B is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 325mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X325B (ISO 21287 ACE), in the same bore, stroke and force class.
The ACP100X325B is a double acting compact cylinder in the discontinued AirTAC ACP DIN-standard series, built with a 100 mm bore, a 325 mm male-threaded rod stroke and a 25 mm hard-chrome S45C piston rod. At 0.5 MPa it pushes with 3927 N and pulls with 3681.6 N, rising to 5497.8 N on the extend stroke at 0.7 MPa, with a theoretical peak of 800.9 kgf at 1.0 MPa. Air supply runs 0.15-1.0 MPa (22-145 psi) and rod speed 30-500 mm/s, with a fixed TPU bumper at each end.
Its short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 325 mm stroke still fits deep presses, gantry lifters and long-travel guards where a full-length body would not. Note this unit carries no magnet; order the -S code if CMSE / DMSE switches are needed. This model is discontinued and the current direct is the ACE100X325 - confirm ISO 21287 mounting dimensions before swapping.
| Model | Airtac ACP Compact Cylinder ACP100X325B |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X325B |
| Bore size | Ø100 mm |
| Stroke | 325 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X325B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X325B produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×325 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
A 325 mm stroke on a 100 mm bore gives the long travel a recycling-line compactor needs, with 5497.8 N available at 0.7 MPa for dense material.
The male M16x1.5 rod thread bolts straight to I/Y knuckles on the ISO 21287 face, clamping heavy castings in a foundry machining fixture.
At 100 mm bore this is the top of the ACP range: 3927 N push at 0.5 MPa, versus 2513.3 N for the 80 mm bore and 1558.6 N for the 63 mm. If your load needs under about 2356 N of working force, the 80 mm size may save air and cost; step up is not possible within the series. The 325 mm stroke exceeds the 300 mm standard maximum for bore 100, so it is made to order - expect a non-standard lead time. The B code gives a male M16x1.5 rod thread; PT ports are 1/4". For held loads remember the piston drifts when air is lost, so add a rod lock or pilot check valve. Replacement: ACE100X325, same bore, stroke and force class.
Replacement checklist
At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa push rises to 5497.8 N (pull 5154.2 N). Theoretical maximum is 800.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, air filtered to 40 um. The 325 mm stroke is non-standard for this bore (standard max 300 mm) and is made to order.
No - the ACP100X325B is discontinued. The current-production replacement is the ACE100X325 (swap the P for an E), an ISO 21287 compact cylinder in the same bore, stroke and force class. Because the ACP was built to a DIN standard, confirm the ISO 21287 mounting dimensions and the FA/FB, LB, CA/CB or SDB bracket fit before ordering the swap.
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X325B replacement — usually within 7-8 hours.