This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X35, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP100X35
The AirTAC ACP Compact Cylinder ACP100X35 is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 35mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X35 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ100 mm
- Stroke35 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → ACE100X35
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP100X35
A double acting compact cylinder in the DIN-standard ACP series, the ACP100X35 pairs a 100 mm bore with a short 35 mm stroke and delivers 3927 N of push force and 3681.6 N of pull force at 0.5 MPa, rising to 5497.8 N at 0.7 MPa. The hard-anodized aluminium body with an S45C hard-chrome rod saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why this size has long been chosen for heavy presses and clamping fixtures with shallow space envelopes. A fixed TPU bumper sits at both ends of the stroke.
Note that this model is discontinued: the current-production direct is the ISO 21287 ACE100X35, which matches the same bore, stroke and force class, so confirm the ISO 21287 mounting dimensions before swapping. The optional -S magnet code enables CMSE / DMSE switches; without it no magnet is fitted.
Airtac ACP Compact Cylinder ACP100X35 Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP100X35 |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X35 |
| Bore size | Ø100 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X35 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X35 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP100X35
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP100X35 Is Used
Pneumatic press for bearing seating
The 3927 N push at 0.5 MPa (about 240 kg of usable force) seats bearings and bushings in electric motor housings, and the short 35 mm stroke suits shallow press heads.
Heavy clamping fixture on a machining line
Clamps cast-iron pump bodies against a milling fixture; the compact body fits inside the guard where a full-length profile cylinder would not.
Replacing the Airtac ACP Compact Cylinder ACP100X35 with the ACE100X35
At 100 mm bore this is the top of the ACP range, with 3927 N push at 0.5 MPa where an 80 mm bore gives 2513.3 N and no larger bore exists in the series, so step up to the ACE family if you need more force. The 35 mm stroke sits well inside the 300 mm maximum standard stroke for this bore. Choose the female M16x1.5 rod thread as coded here, or order the B variant for a male thread, and add FA/FB flange, LB foot or CA/CB clevis mounting to suit the fixture. If the load must stay put when air is lost, add a rod lock or pilot check valve, since a plain cylinder will drift. Order ACP100X35S if you need CMSE / DMSE switch position sensing, and treat ACE100X35 as the current replacement.
Replacement checklist
- ✓ Current-production ACE → ACE100X35
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP100X35 FAQ
At 0.5 MPa it pushes with 3927 N and pulls with 3681.6 N. At 0.7 MPa those figures rise to 5497.8 N push and 5154.2 N pull. The theoretical maximum at 1.0 MPa is 800.9 kgf. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, and speed runs 30-500 mm/s.
Order the ACE100X35, the ISO 21287 successor made by swapping the P for an E. It matches the same 100 mm bore, 35 mm stroke and force class with a matching short body and mounting family. Because the ACP is DIN-standard, confirm the ISO 21287 mounting dimensions before the swap. Position sensing requires the optional -S magnet code with CMSE / DMSE switches.
Related AirTAC ACE Cylinders
Request a Quote for the ACE100X35
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X35 replacement — usually within 7-8 hours.