verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote

This model is discontinued

AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X5S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.

AirTAC ACP Series · Discontinued Compact Cylinder

Airtac ACP Compact Cylinder ACP100X5S

The AirTAC ACP Compact Cylinder ACP100X5S is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 5mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X5S (ISO 21287 ACE), in the same bore, stroke and force class.

  • BoreØ100 mm
  • Stroke5 mm
  • Port size1/4"
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • StatusDiscontinued → ACE100X5S
$145.19 $158.68Save 8% Ships as ACE100X5S (current AirTAC replacement)
Ships as ACE100X5S, the current AirTAC replacement (the same code under the new prefix). Order this code as usual. Your cart, checkout and order confirmation will show the ACE100X5S we ship. View ACE100X5S
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every ACP100 stroke, mounting and version on one page All ACP100 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac ACP Compact Cylinder ACP100X5S

The ACP100X5S is a double acting DIN-standard compact cylinder with a 100 mm bore and a very short 5 mm stroke, delivering 3927 N push and 3681.6 N pull at 0.5 MPa (5497.8 N push at 0.7 MPa). Its hard-anodized aluminium body with an S45C hard-chrome 25 mm rod carries a fixed TPU bumper at both ends, and the -S code means the magnet is fitted, so CMSE or DMSE reed and solid-state switches can be mounted for end-of-stroke sensing. Air supply is filtered to 40 um, pressure runs 0.15-1.0 MPa (22-145 psi), and speed spans 30-500 mm/s.

The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which suits shallow-stroke clamping in tight fixtures. Note this model is discontinued: the current-production direct is ACE100X5, so confirm ISO 21287 mounting dimensions before swapping.

Airtac ACP Compact Cylinder ACP100X5S Technical Specifications

ModelAirtac ACP Compact Cylinder ACP100X5S
SeriesACP DIN compact cylinder (discontinued)
ReplacementACE100X5S
Bore sizeØ100 mm
Stroke5 mm
Acting typeDouble acting
Port size1/4"
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C
Speed range30 – 500 mm/s
CushionFixed bumper (both ends)
Max standard strokeUp to 300 mm

Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X5S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.

Theoretical Output Force (Ø100mm)

PressurePush forcePull force
0.5 MPa3927 N3682 N
0.7 MPa5498 N5154 N
Max (@1.0 MPa)801 kgf

The ACE100X5S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.

Model Code: Airtac ACP Compact Cylinder ACP100X5S

ACPDIN compact cylinder (double-acting, discontinued).
100Bore size in mm.
×5Stroke length in mm.
SOptional built-in magnet for sensor position sensing (omit for no magnet).
BRod type: B = male thread; blank = female thread.

Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).

Where the Airtac ACP Compact Cylinder ACP100X5S Is Used

compress

Press-head retraction check

A 5 mm stroke with 3927 N push at 0.5 MPa suits confirming full clamp closure on a 100 mm bore hydraulic press fixture, with the fitted magnet signalling the seated position via a DMSE switch.

factory

Aluminium die-casting gate snub

The short body and fixed TPU bumpers let the rod take a hard end-of-travel stop when trimming gates on cast housings, where a full-length profile cylinder will not fit the cell.

Replacing the Airtac ACP Compact Cylinder ACP100X5S with the ACE100X5S

For a 5 mm stroke at this force level, the 100 mm bore is the top of the range; if your load needs less, an ACP80X5S gives 2513.3 N push at 0.5 MPa, while nothing larger exists in this family. Remember the piston drifts when air is lost, so add a rod lock or pilot check valve if the load must stay put. FA/FB flange, LB foot and CA/CB clevis mountings bolt to the same face, and the optional -S magnet on this unit enables CMSE / DMSE switches. Order ACE100X5 as the current replacement and verify ISO 21287 dimensions.

Replacement checklist

  • ✓ Current-production ACE → ACE100X5S
  • ✓ Same bore / stroke / force class
  • ✓ Confirm ISO 21287 mounting dimensions
  • ✓ Port/thread type (PT / G)
  • ✓ Add -S for magnet if you need sensors
View ACE100X5S

Airtac ACP Compact Cylinder ACP100X5S FAQ

At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa push rises to 5497.8 N with pull at 5154.2 N. The theoretical maximum at 1.0 MPa is 800.9 kgf. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, and the 1/4" port serves the 100 mm bore.

The hard-anodized aluminium body is an ISO 21287-class short build, saving about 50% of the mounting length of an ISO 15552 profile cylinder, with FA/FB flange, LB foot and CA/CB clevis options and a female M16x1.5 rod thread. The -S code on this unit means the magnet is fitted, so CMSE or DMSE switches mount directly. The ACP family is discontinued; ACE100X5 is the current-production direct, so confirm ISO 21287 mounting dimensions before ordering.

Related AirTAC ACE Cylinders

Request a Quote for the ACE100X5S

Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X5S replacement — usually within 7-8 hours.

Thank you. We received your request for ACP100X5S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.