This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE100X65B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP100X65B
The AirTAC ACP Compact Cylinder ACP100X65B is a double acting DIN-standard tight/compact air cylinder with a Ø100mm bore and 65mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE100X65B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ100 mm
- Stroke65 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM16×1.5
- StatusDiscontinued → ACE100X65B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP100X65B
A double acting compact cylinder built to the DIN-standard ACP pattern, the ACP100X65B delivers 3927 N of push force and 3681.6 N of pull at 0.5 MPa, rising to 5497.8 N at 0.7 MPa, with a theoretical peak of 800.9 kgf at 1.0 MPa. The 100 mm bore drives a 25 mm hard-chromed S45C rod over a 65 mm stroke, fed through a 1/4" port, and the male rod thread (the B code) suits rod knuckles and tooling plates. Speed range is 30-500 mm/s across 0.15-1.0 MPa (22-145 psi) of clean, 40 um filtered air.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it fits deep into press fixtures and gantry frames where a full-length body cannot. Note this model is discontinued: the current-production direct is ACE100X65, so confirm the ISO 21287 mounting dimensions before swapping. The fixed TPU bumpers at both ends only soften end-of-travel; they never hold a load, so add a rod lock or pilot check valve where position must be kept.
Airtac ACP Compact Cylinder ACP100X65B Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP100X65B |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE100X65B |
| Bore size | Ø100 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE100X65B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø100mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3682 N |
| 0.7 MPa | 5498 N | 5154 N |
| Max (@1.0 MPa) | 801 kgf | |
The ACE100X65B produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP100X65B
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 100 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP100X65B Is Used
Pneumatic press fixture
The 3927 N push at 0.5 MPa (about 2356 N usable) clinches, stakes and light-forms aluminium brackets in a bench press jig, with the short body fitting inside the press head.
CNC clamping slide
Clamps a 6061 billet against a hard stop on a machining-centre fixture; the 1/4" port and male rod thread (B) bolt straight to a standard fixture plate via FA/FB or LB hardware.
Replacing the Airtac ACP Compact Cylinder ACP100X65B with the ACE100X65B
At 100 mm bore this is the top of the ACP range, so nothing larger exists in the family; if 3927 N at 0.5 MPa is more than your job needs, the 80 mm bore (2513 N push) is the step down. The 65 mm stroke sits well inside the 300 mm maximum standard stroke for this bore, so it is a catalogue item, not a made-to-order build. Choose the B male rod thread if you bolt on I/Y knuckles; the female-thread version is the alternative. If you need position feedback, order the -S code to add the optional magnet for CMSE / DMSE switches - without -S there is no magnet in the piston. For new designs, specify ACE100X65 instead, since ACP is discontinued.
Replacement checklist
- ✓ Current-production ACE → ACE100X65B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP100X65B FAQ
At 0.5 MPa it pushes 3927 N and pulls 3681.6 N; at 0.7 MPa push is 5497.8 N and pull 5154.2 N; the theoretical maximum is 800.9 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, air filtered to 40 um, -20 to +70 C, speed 30-500 mm/s.
No - the ACP family is discontinued. The current-production direct is ACE100X65 (swap the P for an E), which matches the same 100 mm bore, 65 mm stroke and force class in the ISO 21287 short-body format. Because the ACP was built to a DIN standard, confirm the ISO 21287 mounting dimensions against your fixture before ordering the swap. The ACE keeps the same mounting family: FA/FB flange, LB foot and CA/CB clevis options, plus I/Y rod knuckles.
Related AirTAC ACE Cylinders
Request a Quote for the ACE100X65B
Send us the quantity and destination. We confirm price, stock and lead time on the ACE100X65B replacement — usually within 7-8 hours.