This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE12X110SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP12X110SB
The AirTAC ACP Compact Cylinder ACP12X110SB is a double acting DIN-standard tight/compact air cylinder with a Ø12mm bore and 110mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE12X110SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ12 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM3×0.5
- StatusDiscontinued → ACE12X110SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP12X110SB
A double acting compact cylinder in the DIN-standard ACP series, the ACP12X110SB runs a 12 mm bore with a 110 mm made-to-order stroke, a 6 mm male-threaded rod and an M5x0.8 port. At 0.5 MPa it pushes 56.5 N and pulls 42.4 N, rising to 79.2 N and 59.4 N at 0.7 MPa, with a theoretical peak of 11.5 kgf at 1.0 MPa. The hard-anodized aluminium body with an S45C hard-chrome rod keeps the short ISO 21287-class footprint about 50% shorter in mounting length than an ISO 15552 profile cylinder, so it slots into slim fixtures and guarding where a full-length body will not fit.
This unit carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be clamped straight onto the tube for end-of-stroke sensing. A fixed TPU bumper at each end decelerates the piston, and the 110 mm stroke exceeds the 50 mm standard for this bore, so it is built to order. Note that ACP12X110SB is discontinued: the current-production successor is ACE12X110, a direct in the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP12X110SB Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP12X110SB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE12X110SB |
| Bore size | Ø12 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M3×0.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 50 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE12X110SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 57 N | 42 N |
| 0.7 MPa | 79 N | 59 N |
| Max (@1.0 MPa) | 12 kgf | |
The ACE12X110SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP12X110SB
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 12 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP12X110SB Is Used
Position-verified micro ejection
Ejects small stamped parts off a die or nest with 56.5 N push at 0.5 MPa, while the -S magnet and a DMSE switch confirm full extension before the next cycle starts.
Lab sample presenter
The 110 mm reach slides sample vials or slides into an analyzer station; the compact short body fits inside the instrument housing where a longer cylinder cannot.
Light gate latch on assembly cells
Latches or releases a small fixture gate with about 34 N of usable force at 0.5 MPa, and the male rod thread takes an I-type knuckle for a pivoting link.
Replacing the Airtac ACP Compact Cylinder ACP12X110SB with the ACE12X110SB
Size this bore by load: 56.5 N push at 0.5 MPa suits light clamping and small part ejection; step up to the 16 mm bore (100.5 N push at 0.5 MPa) when loads double, or drop to a direct-acting mini slide if 56.5 N is generous. The 110 mm stroke is non-standard for a 12 mm bore (standard tops out at 50 mm), so expect made-to-order lead time. The B code gives a male rod thread, ideal for rod knuckles on the ISO 21287 mounting face. Remember the piston drifts when air is lost - add a rod lock or pilot check valve if the load must hold. Order ACE12X110 as the current replacement.
Replacement checklist
- ✓ Current-production ACE → ACE12X110SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP12X110SB FAQ
At 0.5 MPa it delivers 56.5 N push and 42.4 N pull; at 0.7 MPa, 79.2 N push and 59.4 N pull; theoretical maximum is 11.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, temperature -20 to +70 C, and the port is M5x0.8. The 110 mm stroke is a made-to-order length since the bore 12 standard maximum is 50 mm.
No - ACP12X110SB is discontinued. The current-production replacement is ACE12X110, which swaps the P for an E and matches the same 12 mm bore, 110 mm stroke and force class in the ISO 21287 compact family. Because the ACP was built to a DIN standard, confirm the ISO 21287 mounting dimensions and port positions before ordering the swap. CMSE and DMSE switches work with the -S magnet code on the ACE as well.
Related AirTAC ACE Cylinders
Request a Quote for the ACE12X110SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACE12X110SB replacement — usually within 7-8 hours.