This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACE20X110 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACE20X110 in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP20X110
The AirTAC Airtac ACP Compact Cylinder ACP20X110 is a double acting DIN-standard tight/compact air cylinder with a Ø20mm bore and 110mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE20X110 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ20 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting
- Rod threadM6×1.0
- StatusDiscontinued → ACE20X110
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP20X110
The ACP20X110 is a double acting DIN-standard compact cylinder with a 20 mm bore and a 110 mm stroke. Air drives the rod out and back, and a fixed TPU bumper sits at each end of the hard-anodized aluminium body. The 10 mm S45C hard-chrome rod carries a female M6x1.0 thread, and the air port is M5x0.8. Its short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight jigs and guarding where a full-length body cannot.
At 0.5 MPa this bore pushes 157.1 N and pulls 117.8 N; at 0.7 MPa it reaches 219.9 N push. In practice plan on roughly 94 N of usable work at 0.5 MPa, which corresponds to lifting about 8 kg vertically with a 2:1 margin. Note the 110 mm stroke is beyond the 100 mm standard limit for bore 20, so it is a made-to-order build. This model is discontinued; the current drop-in is the ACE20X110, which matches the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP20X110 Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP20X110 |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE20X110 |
| Bore size | Ø20 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE20X110 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø20mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 157 N | 118 N |
| 0.7 MPa | 220 N | 165 N |
| Max (@1.0 MPa) | 32 kgf | |
The ACE20X110 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP20X110
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 20 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP20X110 Is Used
Compact jig clamping
The 157.1 N push at 0.5 MPa clamps small aluminium brackets in drilling jigs, and the short body tucks inside fixture plates where a full-length cylinder will not fit.
Light part ejection
With about 8 kg of vertical lift capacity at a 2:1 margin, the 110 mm stroke ejects small plastic housings from a molding nest or pushes parts off a conveyor stop.
Positioned slide feed
Order the -S magnet code to run CMSE or DMSE switches for end-of-stroke detection on a small pick-and-place slide; without -S there is no magnet fitted.
Replacing the Airtac ACP Compact Cylinder ACP20X110 with the ACE20X110
Size the load first: at 0.5 MPa the 20 mm bore gives 157.1 N push, while a 16 mm bore offers only 100.5 N and a 25 mm bore steps up to 245.4 N. If the load must stay put when air is lost, add a rod lock or pilot check valve - this cylinder drifts when the valve centres. The 110 mm stroke is non-standard for bore 20 (standard tops out at 100 mm), so order it as a made-to-order unit. FA/FB flange, LB foot and CA/CB clevis mountings bolt to the ISO 21287 face, and the optional -S magnet code enables CMSE / DMSE switches; without -S there is no magnet. For new designs, order the ACE20X110 instead - this ACP model is discontinued.
Replacement checklist
- ✓ Current-production ACE → ACE20X110
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP20X110 FAQ
At 0.5 MPa it pushes 157.1 N and pulls 117.8 N; at 0.7 MPa, 219.9 N push and 164.9 N pull; theoretical maximum is 32 kgf at 1.0 MPa. It is a double acting compact cylinder, 20 mm bore, 110 mm stroke (non-standard, made to order), 10 mm rod with female M6x1.0 thread, M5x0.8 port, operating pressure 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, fixed TPU bumpers both ends.
Order the ACE20X110: swap the P for an E and you get the current-production ISO 21287 compact cylinder in the same 20 mm bore, 110 mm stroke and force class. Because the ACP was built to a DIN standard, confirm the ISO 21287 mounting dimensions (body length, port position and mounting holes) against your fixture before swapping.
Request a Quote for the ACE20X110
Send us the quantity and destination. We confirm price, stock and lead time on the ACE20X110 replacement — usually within 7-8 hours.