This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACE32X110SB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACE32X110SB in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP32X110SB
The AirTAC Airtac ACP Compact Cylinder ACP32X110SB is a double acting DIN-standard tight/compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE32X110SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- StatusDiscontinued → ACE32X110SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP32X110SB
A double acting DIN-standard compact cylinder, the ACP32X110SB drives a 12 mm hard-chrome rod through a 110 mm stroke from a 32 mm bore. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N, rising to 563 N on extension at 0.7 MPa, with a theoretical ceiling of 82 kgf at 1.0 MPa. The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it fits cramped jigs and guarding where a full-length body cannot. The S code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clipped on for end-of-stroke signalling.
For sizing, plan on about 241 N of real work at 0.5 MPa (roughly 0.6 of the push rating) - in vertical terms it lifts about 20 kg with a 2:1 margin. Air supply is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and fixed TPU bumpers at both ends absorb end-of-travel contact. Note this model is discontinued: the current-production drop-in is the ACE32X110, same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP32X110SB Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP32X110SB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE32X110SB |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE32X110SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
The ACE32X110SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP32X110SB
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP32X110SB Is Used
Fixture clamping on CNC pallets
The 402.1 N push at 0.5 MPa clamps aluminium housings in machining fixtures, and the 110 mm stroke clears the loader arm between cycles.
Packaging line pusher arms
A 12 mm male-thread rod drives a pusher plate that diverts cartons at 30-500 mm/s, with CMSE switches reporting each stroke via the fitted -S magnet.
Gate latch on AGV safety doors
Compact body length suits the tight guard frame of an automated forklift bay; about 20 kg vertical lift capacity covers the latch bar weight with margin.
Replacing the Airtac ACP Compact Cylinder ACP32X110SB with the ACE32X110SB
At 32 mm bore this sits in the mid force band: a 25 mm bore gives 245.4 N push at 0.5 MPa, while a 40 mm bore raises it to 628.3 N - step up if the 402.1 N here is marginal for your load. The 110 mm stroke is within the 200 mm standard range for this bore, so no made-to-order build is needed. The B code gives a male M8x1.25 rod thread and the PT port thread is 1/8". Because a plain cylinder drifts when air is lost, add a rod lock or pilot check valve if the load must stay put. FA/FB flange, LB foot and CA/CB clevis mounts bolt to the same face family. This model is discontinued - order the ACE32X110 as the current equivalent and verify ISO 21287 mounting dimensions first.
Replacement checklist
- ✓ Current-production ACE → ACE32X110SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP32X110SB FAQ
Push is 402.1 N and pull 345.6 N at 0.5 MPa; at 0.7 MPa push rises to 563 N and pull to 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. It is double acting, runs on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, moves at 30-500 mm/s, works from -20 to +70 C, and carries a fixed TPU bumper at each end. The 1/8" port and 12 mm rod with male thread suit standard fittings.
No - the ACP family is discontinued. The current-production drop-in is the ACE32X110, the ISO 21287 successor in the same bore, stroke and force class. Before swapping, confirm the ISO 21287 mounting dimensions against your fixture, since the ACP was built to a DIN-standard footprint. The ACE keeps the same mounting bracket family and the optional magnet for CMSE / DMSE switches.
Related AirTAC ACE Cylinders
Request a Quote for the ACE32X110SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACE32X110SB replacement — usually within 7-8 hours.