This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACE32X75 — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACE32X75 in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP32X75
The AirTAC Airtac ACP Compact Cylinder ACP32X75 is a double acting DIN-standard tight/compact air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE32X75 (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- StatusDiscontinued → ACE32X75
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP32X75
The ACP32X75 is a double acting compact cylinder in the DIN-standard ACP series, with a 32 mm bore and 75 mm stroke driving a 12 mm hard-chrome rod. At 0.5 MPa it pushes 402.1 N and pulls 345.6 N; at 0.7 MPa those figures rise to 563 N and 483.8 N, with a theoretical peak of 82 kgf at 1.0 MPa. The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding where a full-length body cannot.
Air supply runs 0.15-1.0 MPa (22-145 psi) with proof at 1.5 MPa (215 psi), speed range 30-500 mm/s, and a fixed TPU bumper at each end of the hard-anodized aluminium body. For planning, count on roughly 240 N of usable push at 0.5 MPa (about 60% of rating), which corresponds to lifting around 24 kg vertically - or about 12 kg with a 2:1 margin. This model is discontinued; the current-production successor is ACE32X75, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP32X75 Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP32X75 |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE32X75 |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE32X75 (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
The ACE32X75 produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP32X75
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP32X75 Is Used
Fixture clamping on CNC pallets
With 402.1 N push at 0.5 MPa, the 32 mm bore clamps aluminium housings on machining-centre pallets; the 75 mm stroke clears part loading and the short body fits inside the fixture base.
Small press and staking stations
Around 24 kg of usable vertical force at 0.5 MPa handles staking pins and light riveting on electronics assemblies, with the fixed TPU bumper softening end-of-stroke contact at up to 500 mm/s.
Packaging line pushers
The 345.6 N pull at 0.5 MPa retracts a pusher bar between cartons on a food-packaging conveyor, where the compact body mounts under a low guard rail.
Replacing the Airtac ACP Compact Cylinder ACP32X75 with the ACE32X75
At 402.1 N push and 345.6 N pull at 0.5 MPa, the 32 mm bore suits clamping and pressing tasks in the 20-25 kg load class. Step down to the 25 mm bore (245.4 N push) for lighter fixtures, or up to 40 mm (628.3 N push) if your part weight or press force grows. The 75 mm stroke sits well inside the 200 mm maximum standard stroke for this bore. Rod end is female M8x1.25 with a PT port thread; FA/FB flange, LB foot and CA/CB clevis mountings bolt to the same face. If you need position feedback, order the -S variant to enable CMSE / DMSE switches - without the S code there is no magnet. Note that a plain ACP32X75 will drift when air is lost; add a rod lock or pilot check valve for held loads. Replacement: ACE32X75.
Replacement checklist
- ✓ Current-production ACE → ACE32X75
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP32X75 FAQ
Push is 402.1 N and pull 345.6 N at 0.5 MPa; at 0.7 MPa push is 563 N and pull 483.8 N, with a theoretical maximum of 82 kgf at 1.0 MPa. It is a double acting compact cylinder, 32 mm bore, 75 mm stroke, 12 mm rod, 1/8" PT port, female M8x1.25 rod thread, operating pressure 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, air filtered to 40 um, with a fixed TPU bumper at both ends.
Order ACE32X75, the ISO 21287 successor: swap the P for an E and you get the same 32 mm bore, 75 mm stroke and force class in a current-production body. Because the ACP is DIN-standard, confirm the ISO 21287 mounting dimensions against your fixture before swapping. FA/FB flange, LB foot and CA/CB clevis options carry over, and the optional -S magnet code still enables CMSE / DMSE switches on the ACE.
Request a Quote for the ACE32X75
Send us the quantity and destination. We confirm price, stock and lead time on the ACE32X75 replacement — usually within 7-8 hours.