This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE40X75B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP40X75B
The AirTAC ACP Compact Cylinder ACP40X75B is a double acting DIN-standard tight/compact air cylinder with a Ø40mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE40X75B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ40 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- StatusDiscontinued → ACE40X75B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP40X75B
A double acting compact cylinder in the DIN-standard ACP series, the ACP40X75B pairs a 40 mm bore with a 75 mm stroke and a male rod thread (the B code). At 0.5 MPa it pushes 628.3 N and pulls 571.8 N, rising to 879.6 N on extension at 0.7 MPa, with a theoretical ceiling of 128.1 kgf at 1.0 MPa. Its hard-anodized aluminium body and S45C hard-chrome rod run on 0.15-1.0 MPa (22-145 psi) filtered air at 30-500 mm/s.
The short ISO 21287-class body cuts roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures and guarding. A fixed TPU bumper sits at both ends. Note this model is discontinued: the current direct is ACE40X75, so confirm ISO 21287 mounting dimensions before ordering.
Airtac ACP Compact Cylinder ACP40X75B Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP40X75B |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE40X75B |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE40X75B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 572 N |
| 0.7 MPa | 880 N | 800 N |
| Max (@1.0 MPa) | 128 kgf | |
The ACE40X75B produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP40X75B
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP40X75B Is Used
Carton press-down station
The 628.3 N push at 0.5 MPa seats flaps and labels on a 75 mm stroke, and the short body fits under low packaging-machine frames.
Fixture clamping on a CNC jig
Male rod thread takes an I knuckle for swing clamps holding aluminium housings during machining, with FA flange mounting to the jig plate.
Pusher on a bottling line
About 32 kg of vertical-lift equivalent nudges bottles between lanes at 30-500 mm/s, with DMSE switches when the -S magnet is ordered.
Replacing the Airtac ACP Compact Cylinder ACP40X75B with the ACE40X75B
The 75 mm stroke is well inside the 200 mm standard limit for this bore. This B version has a male rod thread; the plain code gives female M8x1.25. No magnet is fitted - order the -S code if you need CMSE or DMSE switch positions. Remember a plain cylinder drifts when air is lost; add a rod lock or pilot check valve for held loads. For new builds, specify ACE40X75 instead.
Replacement checklist
- ✓ Current-production ACE → ACE40X75B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP40X75B FAQ
Push is 628.3 N and pull 571.8 N at 0.5 MPa; at 0.7 MPa push rises to 879.6 N and pull to 800.5 N. Theoretical maximum is 128.1 kgf at 1.0 MPa. Derate to about 377 N (roughly 32 kg vertical lift) for real work. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, port 1/8" PT, rod 12 mm male thread.
The compact aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and FA/FB flanges, LB feet or CA/CB clevises bolt straight to the standard face. The fixed TPU bumper only softens end-of-stroke contact - it never holds a load, so use a rod lock or pilot check valve where position must be kept. This model is discontinued; ACE40X75 is the current replacement, so verify ISO 21287 dimensions before swapping.
Request a Quote for the ACE40X75B
Send us the quantity and destination. We confirm price, stock and lead time on the ACE40X75B replacement — usually within 7-8 hours.