This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE40X75S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP40X75S
The AirTAC ACP Compact Cylinder ACP40X75S is a double acting DIN-standard tight/compact air cylinder with a Ø40mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE40X75S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ40 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- StatusDiscontinued → ACE40X75S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP40X75S
A double acting compact cylinder with a 40 mm bore and 75 mm stroke, the ACP40X75S pushes with 628.3 N and pulls with 571.8 N at 0.5 MPa, rising to 879.6 N at 0.7 MPa. Its hard-anodized aluminium body and S45C hard-chrome rod suit 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, running 30-500 mm/s between -20 and +70 C. The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight machine frames.
This unit carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be clamped straight onto the body for end-of-stroke sensing. Note that ACP is discontinued: the current-production direct is ACE40X75, so confirm ISO 21287 mounting dimensions before ordering.
Airtac ACP Compact Cylinder ACP40X75S Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP40X75S |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE40X75S |
| Bore size | Ø40 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE40X75S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø40mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 628 N | 572 N |
| 0.7 MPa | 880 N | 800 N |
| Max (@1.0 MPa) | 128 kgf | |
The ACE40X75S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP40X75S
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 40 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP40X75S Is Used
Fixture clamping on CNC pallets
The 628.3 N push at 0.5 MPa secures aluminium housings in machining fixtures, and the 75 mm stroke clears part loading in tight jig plates.
Packaging line pushers
At 30-500 mm/s the cylinder kicks cartons across a conveyor lane, with CMSE switches on the -S magnet confirming each reject stroke.
Replacing the Airtac ACP Compact Cylinder ACP40X75S with the ACE40X75S
For a 75 mm stroke in the 600 N class, bore 40 is the right pick; bore 32 delivers 402.1 N at 0.5 MPa if the load is lighter, while bore 50 reaches 981.7 N for heavier clamping. Keep in mind a plain ACP drifts when air is lost, so add a rod lock or pilot check valve if the load must stay put. FA/FB flange, LB foot and CA/CB clevis mounts plus the fitted -S magnet for CMSE/DMSE switches round out the spec. Since ACP is discontinued, order ACE40X75 and verify the ISO 21287 mounting footprint.
Replacement checklist
- ✓ Current-production ACE → ACE40X75S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP40X75S FAQ
At 0.5 MPa it pushes 628.3 N and pulls 571.8 N; at 0.7 MPa that rises to 879.6 N push and 800.5 N pull, with a theoretical maximum of 128.1 kgf at 1.0 MPa. It is double acting, 40 mm bore with a 12 mm rod, 1/8" PT ports, M8x1.25 female rod thread, 0.15-1.0 MPa (22-145 psi) working pressure and 30-500 mm/s speed. The model is discontinued; ACE40X75 is the replacement.
The short ISO 21287-class body cuts about 50% of the mounting length of an ISO 15552 profile cylinder, ideal for cramped gantries and guards. Because this is the S version, the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches mount directly on the barrel. Fixed TPU bumpers decelerate the piston at each end, and FA/FB, LB or CA/CB mounting brackets bolt to the standard face.
Request a Quote for the ACE40X75S
Send us the quantity and destination. We confirm price, stock and lead time on the ACE40X75S replacement — usually within 7-8 hours.