This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE50X95B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP50X95B
The AirTAC ACP Compact Cylinder ACP50X95B is a double acting DIN-standard tight/compact air cylinder with a Ø50mm bore and 95mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE50X95B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ50 mm
- Stroke95 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- StatusDiscontinued → ACE50X95B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP50X95B
The ACP50X95B is a double acting compact cylinder built to the DIN-standard short-body format: 50 mm bore, 95 mm stroke and a 16 mm hard-chrome S45C rod driven from both ends by air. At 0.5 MPa it pushes with 981.7 N and pulls with 881.2 N, rising to 1374.4 N on the extend stroke at 0.7 MPa. Its hard-anodized aluminium body with threaded aluminium covers saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight machine frames and fixtures. A fixed TPU bumper sits at each end of travel.
The male rod thread (the B code) suits rod knuckles and tooling plates; the optional -S magnet code enables CMSE / DMSE switches, and without it no magnet is fitted. This model is discontinued - the current direct is the ISO 21287 ACE50X95, so confirm mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP50X95B Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP50X95B |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE50X95B |
| Bore size | Ø50 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE50X95B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
The ACE50X95B produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP50X95B
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 50 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP50X95B Is Used
Carton press-down station
The 981.7 N push at 0.5 MPa seats flaps and labels on a packaging line, and the short body tucks under low guard rails where a full-length cylinder cannot fit.
Clamping fixture on a machining cell
Roughly 589 N of usable holding force secures aluminium castings in a milling fixture, with the male rod thread taking an I-type knuckle straight onto the part.
Pallet gate actuator
Swings a safety gate arm on a warehouse conveyor via a CA clevis mount, with the 95 mm stroke clearing the walkway and speed set within 30-500 mm/s.
Replacing the Airtac ACP Compact Cylinder ACP50X95B with the ACE50X95B
At 95 mm stroke this sits mid-range for the 50 mm bore, whose standard strokes run to 250 mm, so no special build is needed. If 981.7 N of push at 0.5 MPa is more than the job needs, a 40 mm bore (628.3 N) may suffice; if the load approaches the 200.2 kgf theoretical ceiling, step up to 63 mm (1558.6 N). Remember the piston drifts when air is lost - add a rod lock or pilot check valve for held loads. Match FA/FB flange, LB foot or CA/CB clevis mounts to the fixture, order -S if CMSE / DMSE sensing is planned, and specify ACE50X95 for new projects since ACP is discontinued.
Replacement checklist
- ✓ Current-production ACE → ACE50X95B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP50X95B FAQ
At 0.5 MPa the bore delivers 981.7 N push and 881.2 N pull; at 0.7 MPa that becomes 1374.4 N push and 1233.7 N pull. The theoretical maximum is 200.2 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, port 1/8" PT, rod 16 mm male thread.
No - ACP50X95B is discontinued. The current-production replacement is ACE50X95, an ISO 21287 compact cylinder in the same bore, stroke and force class; confirm the mounting dimensions before converting because the ACP followed the DIN-standard format. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and FA/FB flange, LB foot and CA/CB clevis brackets bolt to the standard face. Add -S to the order code if you need CMSE / DMSE switch sensing.
Request a Quote for the ACE50X95B
Send us the quantity and destination. We confirm price, stock and lead time on the ACE50X95B replacement — usually within 7-8 hours.