This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE63X10SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP63X10SB
The AirTAC ACP Compact Cylinder ACP63X10SB is a double acting DIN-standard tight/compact air cylinder with a Ø63mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE63X10SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- StatusDiscontinued → ACE63X10SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP63X10SB
A double acting DIN-standard compact cylinder, the ACP63X10SB pairs a 63 mm bore with a very short 10 mm stroke and a male rod thread (B code). At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa those rise to 2182.1 N and 2041.3 N, with a theoretical ceiling of 317.9 kgf at 1.0 MPa. The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures a full-length bore cannot reach.
This unit carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be clamped directly on the body for end-of-stroke sensing. Note that ACP is discontinued: the current-production direct is ACE63X10, and you should confirm the ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP63X10SB Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP63X10SB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE63X10SB |
| Bore size | Ø63 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE63X10SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
The ACE63X10SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP63X10SB
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP63X10SB Is Used
Press-fit clamping of bearing housings
A 10 mm stroke is ideal for a final clamp on an automotive bearing housing: 1558.6 N at 0.5 MPa seats the part, and the short body fits inside the jig frame.
Carton hold-down on a packing line
Mounted head-down over a sealing head, the 63 mm bore holds cartons flat at up to 2182.1 N at 0.7 MPa while the tape head passes, with CMSE switches confirming clamp position.
Replacing the Airtac ACP Compact Cylinder ACP63X10SB with the ACE63X10SB
At 10 mm stroke this bore is aimed at clamping, marking and short eject strokes rather than long travel. If 1558.6 N at 0.5 MPa is more than the job needs, a 50 mm bore (981.7 N push) is the smaller step; if more force is required, an 80 mm bore delivers 2513.3 N. Remember that a plain cylinder of this type drifts when air is lost, so add a rod lock or pilot check valve for a held load. FA/FB flange, LB foot and CA/CB clevis mountings bolt to the same face family, and the -S magnet on this model accepts CMSE / DMSE switches. Order ACE63X10 as the current replacement and verify ISO 21287 dimensions first.
Replacement checklist
- ✓ Current-production ACE → ACE63X10SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP63X10SB FAQ
Push is 1558.6 N and pull 1458.1 N at 0.5 MPa; at 0.7 MPa push is 2182.1 N and pull 2041.3 N, with a theoretical maximum of 317.9 kgf at 1.0 MPa. It is a double acting compact cylinder, 63 mm bore, 10 mm stroke, 16 mm rod with male thread, 1/8" PT ports, operating on 0.15-1.0 MPa (22-145 psi) air filtered to 40 um, speed 30-500 mm/s, temperature -20 to +70 C, with a fixed TPU bumper at both ends.
AirTAC no longer produces the ACP family. The current-production successor is ACE63X10, an ISO 21287 compact cylinder in the same bore, stroke and force class. Because the ACP was built to a DIN standard, confirm the ISO 21287 mounting dimensions against your fixture before swapping. The male rod thread and -S magnet option carry over, and CMSE / DMSE switches mount on the ACE body.
Related AirTAC ACE Cylinders
Request a Quote for the ACE63X10SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACE63X10SB replacement — usually within 7-8 hours.