This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE63X110B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP63X110B
The AirTAC ACP Compact Cylinder ACP63X110B is a double acting DIN-standard tight/compact air cylinder with a Ø63mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE63X110B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- StatusDiscontinued → ACE63X110B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP63X110B
A double acting compact cylinder in the DIN-standard ACP series, the ACP63X110B pairs a 63 mm bore with a 110 mm stroke and a male rod thread (the B code). At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N, rising to 2182.1 N at 0.7 MPa, with a theoretical peak of 317.9 kgf at 1.0 MPa. The hard-anodized aluminium body with an S45C hard-chrome rod runs on 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s, and fixed TPU bumpers sit at both ends. Note that this model is discontinued; the current-production direct is ACE63X110.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight press fixtures and gantries. This unit has no magnet fitted; order the -S code to enable CMSE / DMSE switches. FA/FB flange, LB foot and CA/CB clevis mounts bolt to the standard face.
Airtac ACP Compact Cylinder ACP63X110B Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP63X110B |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE63X110B |
| Bore size | Ø63 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE63X110B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
The ACE63X110B produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP63X110B
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP63X110B Is Used
Clamping weld fixtures
Around 1558.6 N of push at 0.5 MPa clamps steel brackets firmly during MIG welding, and the short body fits inside the fixture frame.
Ejecting stamped parts
The 110 mm stroke clears formed sheet-metal parts off a press die, with the male rod thread (B code) taking a custom stripper plate.
Replacing the Airtac ACP Compact Cylinder ACP63X110B with the ACE63X110B
At 63 mm bore this sits above the 50 mm size (981.7 N push at 0.5 MPa) and below the 80 mm size (2513.3 N), so pick it when a load needs roughly 1500 N and a smaller bore falls short. The 110 mm stroke is well inside the 250 mm maximum standard stroke for this bore, so it is a catalog item, not a made-to-order build. Remember that a plain ACP drifts when air is lost; add a rod lock or pilot check valve if the load must hold. Confirm ISO 21287 mounting dimensions before swapping to ACE63X110.
Replacement checklist
- ✓ Current-production ACE → ACE63X110B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP63X110B FAQ
At 0.5 MPa it delivers 1558.6 N push and 1458.1 N pull; at 0.7 MPa, 2182.1 N push and 2041.3 N pull; theoretical maximum is 317.9 kgf at 1.0 MPa. The ACP family is discontinued, so order the ACE63X110 as the current-production replacement and confirm the ISO 21287 mounting dimensions first.
The compact aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and fixed TPU bumpers at both ends soften the ends of travel. They do not hold or brake the load, so a rod lock or pilot check valve is needed for a held position. The magnet is the optional -S code; without it no CMSE or DMSE switch can be fitted.
Related AirTAC ACE Cylinders
Request a Quote for the ACE63X110B
Send us the quantity and destination. We confirm price, stock and lead time on the ACE63X110B replacement — usually within 7-8 hours.