This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE63X110S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP63X110S
The AirTAC ACP Compact Cylinder ACP63X110S is a double acting DIN-standard tight/compact air cylinder with a Ø63mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE63X110S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- StatusDiscontinued → ACE63X110S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP63X110S
The ACP63X110S is a double acting compact cylinder in the DIN-standard ACP series, with a 63 mm bore and 110 mm stroke on a 16 mm hard-chrome S45C rod. Air drives the piston both ways, and fixed TPU bumpers at each end absorb end-of-travel impact. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa those rise to 2182.1 N and 2041.3 N, with a theoretical maximum of 317.9 kgf at 1.0 MPa. The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into cramped welding jigs and press fixtures.
Because the S code is in this model, the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clamped straight onto the hard-anodized aluminium body for end-of-stroke signalling. Note that this model is discontinued; the current-production direct is ACE63X110, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP63X110S Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP63X110S |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE63X110S |
| Bore size | Ø63 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE63X110S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
The ACE63X110S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP63X110S
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP63X110S Is Used
CNC fixture clamping
The 1558.6 N push at 0.5 MPa secures aluminium housings in a machining fixture, and the short body fits inside the clamp pocket where a full-length cylinder cannot.
Case ejector on a carton line
The 1458.1 N pull at 0.5 MPa retracts a pusher arm that kicks rejected cartons off a packaging conveyor at speeds up to 500 mm/s.
Replacing the Airtac ACP Compact Cylinder ACP63X110S with the ACE63X110S
Size against the job: a 50 mm bore gives 981.7 N push at 0.5 MPa, while an 80 mm bore reaches 2513.3 N, so the 63 mm sits squarely in the middle for mid-range clamping and lifting. If the load must stay held when air is lost, add a rod lock or pilot check valve, since the piston drifts once pressure drops. This unit carries the optional -S magnet for CMSE / DMSE switches, and FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot and FTC brackets bolt to the same face. ACP63X110S is discontinued; order ACE63X110 as the current direct and verify the ISO 21287 mounting dimensions first.
Replacement checklist
- ✓ Current-production ACE → ACE63X110S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP63X110S FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N. At 0.7 MPa the figures are 2182.1 N push and 2041.3 N pull. The theoretical maximum is 317.9 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, and rod speed runs 30-500 mm/s.
No, the ACP family is discontinued. The current-production replacement is ACE63X110, an ISO 21287 compact cylinder in the same bore, stroke and force class. Its short body still saves about 50% of the mounting length of an ISO 15552 profile cylinder, but because the ACP was DIN-standard, confirm the ISO 21287 mounting dimensions before swapping. This unit already carries the optional -S magnet for CMSE / DMSE switches.
Related AirTAC ACE Cylinders
Request a Quote for the ACE63X110S
Send us the quantity and destination. We confirm price, stock and lead time on the ACE63X110S replacement — usually within 7-8 hours.