This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE63X45SBH, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.

The AirTAC ACP Compact Cylinder ACP63X45SBH is a double acting DIN-standard tight/compact air cylinder with a Ø63mm bore and 45mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE63X45SBH (ISO 21287 ACE), in the same bore, stroke and force class.
The ACP63X45SBH is a double acting DIN-standard compact cylinder with a 63 mm bore and 45 mm stroke. At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa those rise to 2182.1 N and 2041.3 N, with a theoretical peak of 317.9 kgf at 1.0 MPa. The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight machine frames and gantries. This unit carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be added, and the B code gives a male rod thread on the 16 mm rod.
Build details: hard-anodized aluminium body, S45C hard-chrome rod, aluminium covers threaded onto the body, and a fixed TPU bumper at each end. Air supply is filtered to 40 um, pressure runs 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof, temperature spans -20 to +70 C, and speed is 30-500 mm/s. Note that this model is discontinued: the current-production direct is ACE63X45, and buyers should confirm the ISO 21287 mounting dimensions before swapping.
| Model | Airtac ACP Compact Cylinder ACP63X45SBH |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE63X45SBH |
| Bore size | Ø63 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE63X45SBH (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
The ACE63X45SBH produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
The 1558.6 N push at 0.5 MPa clamps aluminum or cast-iron workpieces in dedicated fixtures, and the 45 mm stroke clears chip shields in tight envelopes.
With about 159 kgf of theoretical thrust at 0.5 MPa, this bore presses small bearings and bushings into housings on an assembly bench, lifting parts of roughly 79 kg with margin.
The male rod thread drives a stopper blade that raises and lowers cartons between conveyor lanes, with CMSE or DMSE switches confirming gate position via the -S magnet.
At 45 mm stroke this bore delivers 1558.6 N of push at 0.5 MPa - enough for clamping and short-stroke pressing on medium fixtures. If your load needs under 981.7 N, the 50 mm bore costs less; if you need over 2182 N at 0.7 MPa, step up to the 80 mm bore (2513.3 N at 0.5 MPa). The 45 mm stroke sits well inside the 250 mm maximum standard stroke for bore 63, so it is a catalog item, not a made-to-order length. Remember the piston drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. FA/FB flange, LB foot and CA/CB clevis mounts bolt to the same face, and this -S version accepts CMSE / DMSE switches. Order ACE63X45 as the current replacement and verify ISO 21287 mounting dimensions first.
Replacement checklist
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa it pushes 2182.1 N and pulls 2041.3 N; the theoretical maximum is 317.9 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof, speed 30-500 mm/s, air filtered to 40 um, and temperature -20 to +70 C. The 16 mm rod carries a male thread (B code) and the port is 1/8" PT.
No - the ACP family is discontinued. The current-production direct is ACE63X45, the ISO 21287 successor in the same bore, stroke and force class. Because the ACP is DIN-standard, confirm the ISO 21287 mounting dimensions before swapping. This unit's -S magnet works with CMSE / DMSE switches, and the fixed TPU bumpers at both ends simply decelerate the piston at each end of travel.
Send us the quantity and destination. We confirm price, availability and lead time on the ACE63X45SBH replacement — usually within 7 hours.