This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE63X60B, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP63X60B
The AirTAC ACP Compact Cylinder ACP63X60B is a double acting DIN-standard tight/compact air cylinder with a Ø63mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE63X60B (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- StatusDiscontinued → ACE63X60B
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP63X60B
A double acting compact cylinder in the DIN-standard ACP series, the ACP63X60B delivers 1558.6 N of push and 1458.1 N of pull at 0.5 MPa (2182.1 N / 2041.3 N at 0.7 MPa) from a 63 mm bore with a 60 mm stroke. The B code gives a male rod thread on the 16 mm rod, and the 1/8" port serves both ends. Its hard-anodized aluminium body runs a fixed TPU bumper at each end, with a speed range of 30-500 mm/s.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight presses and fixtures. Note: this model is discontinued - the current-production direct is the ACE63X60, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP63X60B Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP63X60B |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE63X60B |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE63X60B (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
The ACE63X60B produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP63X60B
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP63X60B Is Used
Pneumatic press station
The 1558.6 N push at 0.5 MPa swages terminals and rivets on an electronics assembly bench, with the 60 mm stroke clearing parts by hand between cycles.
Weld fixture clamping
Clamps steel brackets against a jig on an automotive subassembly line; the short body fits where a full-length ISO 15552 profile cylinder cannot.
Pallet gate actuator
Swings a stop gate on a warehouse conveyor diverter, where the male rod thread (B code) bolts straight to a link arm.
Replacing the Airtac ACP Compact Cylinder ACP63X60B with the ACE63X60B
At 0.5 MPa this bore pushes 1558.6 N; if your load needs less, the 50 mm bore offers 981.7 N, and the 80 mm bore raises it to 2513.3 N. Stroke 60 mm sits well inside the 250 mm standard limit for bore 63. Remember the cylinder drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. This unit has no magnet; order the -S code (ACP63X60BSB) if you need CMSE or DMSE switches. Mount with FA/FB flange, LB foot or CA/CB clevis. For new projects, specify the ACE63X60 instead.
Replacement checklist
- ✓ Current-production ACE → ACE63X60B
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP63X60B FAQ
At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa, 2182.1 N push and 2041.3 N pull. The theoretical maximum is 317.9 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, air filtered to 40 um.
The ACP63X60B is discontinued; the current-production replacement is the ACE63X60 in the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping. Position sensing requires the optional -S magnet code (ACP63X60BSB), which enables CMSE or DMSE switches; without -S there is no magnet. Mounting options include FA/FB flange, LB foot and CA/CB clevis.
Request a Quote for the ACE63X60B
Send us the quantity and destination. We confirm price, stock and lead time on the ACE63X60B replacement — usually within 7-8 hours.