This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE63X60SB, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP63X60SB
The AirTAC ACP Compact Cylinder ACP63X60SB is a double acting DIN-standard tight/compact air cylinder with a Ø63mm bore and 60mm stroke, 1/8" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE63X60SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ63 mm
- Stroke60 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- StatusDiscontinued → ACE63X60SB
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP63X60SB
A double acting DIN-standard compact cylinder, the ACP63X60SB pairs a 63 mm bore with a 60 mm stroke and a male rod thread (B code). At 0.5 MPa it pushes 1558.6 N and pulls 1458.1 N; at 0.7 MPa those rise to 2182.1 N and 2041.3 N, with a theoretical maximum of 317.9 kgf at 1.0 MPa. The hard-anodized aluminium body with an S45C hard-chrome rod runs on 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight clamping fixtures and gantry stations. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be fitted for end-of-stroke sensing. Note that ACP63X60SB is discontinued: the current-production direct is ACE63X60, matching the same bore, stroke and force class - confirm the ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP63X60SB Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP63X60SB |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE63X60SB |
| Bore size | Ø63 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE63X60SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø63mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 1559 N | 1458 N |
| 0.7 MPa | 2182 N | 2041 N |
| Max (@1.0 MPa) | 318 kgf | |
The ACE63X60SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP63X60SB
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 63 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP63X60SB Is Used
Press-fit bushing insertion
With 1558.6 N of push at 0.5 MPa, the 63 mm bore seats bronze bushings into aluminium pump housings on a small assembly press, with the 60 mm stroke clearing the fixture between cycles.
CNC bar-stock stopper
The short body tucks beside the chuck guard of a CNC lathe, extending a stop pin into the bar path; the male rod thread (B) takes a custom stop block directly.
Carton divert on packaging line
Mounted under a conveyor with an FB flange, the cylinder pushes 79 kg-class cartons off the line at a divert plate, and the fitted -S magnet feeds a DMSE switch signal to the PLC.
Replacing the Airtac ACP Compact Cylinder ACP63X60SB with the ACE63X60SB
Size both ways before committing: a 50 mm bore gives 981.7 N push at 0.5 MPa, while an 80 mm bore reaches 2513.3 N - the 63 mm at 1558.6 N sits between them. The 60 mm stroke is well inside the 250 mm maximum standard stroke for this bore, so it is a catalogue item, not a made-to-order build. Remember that a plain ACP drifts when air is lost; add a rod lock or pilot check valve if the load must stay put. FA/FB flange, LB foot and CA/CB clevis mounts bolt to the same face, and the ACE63X60 is the current replacement.
Replacement checklist
- ✓ Current-production ACE → ACE63X60SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP63X60SB FAQ
At 0.5 MPa the cylinder delivers 1558.6 N push and 1458.1 N pull; at 0.7 MPa that becomes 2182.1 N push and 2041.3 N pull. The theoretical maximum is 317.9 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, and air filtered to 40 um.
No - the ACP family is discontinued. The current-production direct is ACE63X60, which swaps the P for an E and matches the same 63 mm bore, 60 mm stroke and force class in the ISO 21287 short-body format. Because the ACP was built to the DIN standard, confirm the ISO 21287 mounting dimensions before swapping. This model already carries the optional -S magnet, so CMSE / DMSE switches mount directly; the fixed TPU bumpers at both ends simply decelerate the piston at each end of travel.
Related AirTAC ACE Cylinders
Request a Quote for the ACE63X60SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACE63X60SB replacement — usually within 7-8 hours.