This model is discontinued
AirTAC has phased out the ACP series. You can still order this code here: we ship the current replacement ACE80X15S, the same code under the new prefix. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACP Compact Cylinder ACP80X15S
The AirTAC ACP Compact Cylinder ACP80X15S is a double acting DIN-standard tight/compact air cylinder with a Ø80mm bore and 15mm stroke, 1/4" air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACE80X15S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ80 mm
- Stroke15 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- StatusDiscontinued → ACE80X15S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACP Compact Cylinder ACP80X15S
Double acting on both strokes, the ACP80X15S pairs an 80 mm bore with a short 15 mm stroke and delivers 2513.3 N of push force and 2356.2 N of pull force at 0.5 MPa, rising to 3518.6 N at 0.7 MPa. The hard-anodized aluminium body with an S45C hard-chrome rod carries a fixed TPU bumper at each end, and the S in the code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be mounted directly on the tube. Operating range is 0.15-1.0 MPa (22-145 psi) with rod speed of 30-500 mm/s.
The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this bore size fits tight presses, clamping fixtures and gantry stations where a full-length body cannot. Note this model is discontinued: the current-production replacement is the ACE80X15, so confirm ISO 21287 mounting dimensions before swapping.
Airtac ACP Compact Cylinder ACP80X15S Technical Specifications
| Model | Airtac ACP Compact Cylinder ACP80X15S |
|---|---|
| Series | ACP DIN compact cylinder (discontinued) |
| Replacement | ACE80X15S |
| Bore size | Ø80 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACE80X15S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
The ACE80X15S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACP Compact Cylinder ACP80X15S
| ACP | DIN compact cylinder (double-acting, discontinued). |
|---|---|
| 80 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (double rod, adjustable stroke).
Where the Airtac ACP Compact Cylinder ACP80X15S Is Used
Short-stroke press fixture
With 2513.3 N of push at 0.5 MPa over a 15 mm stroke, this bore size is ideal for a swaging or marking station on an aluminium extrusion line where the die travel is minimal but the force is not.
Gantry clamp actuator
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, letting the 80 mm bore sit inside a CNC fixture clamp arm that a full-length body would foul.
Replacing the Airtac ACP Compact Cylinder ACP80X15S with the ACE80X15S
At 80 mm bore this is the second-largest size in the family: 2513.3 N push at 0.5 MPa versus 1558.6 N for a 63 mm bore and 3927.0 N for a 100 mm bore, so step down to 63 if the load is under about 1500 N and up to 100 only when you truly need the extra force. The 15 mm stroke suits short clamp-and-release motions; bores 80 accept standard strokes up to 300 mm if a longer version is ever needed. Remember that a plain cylinder drifts when air is lost, so add a rod lock or pilot check valve if the load must stay put. FA/FB flange, LB foot and CA/CB clevis mounts plus I/Y rod knuckles bolt to the same face, and the ACE80X15 is the direct successor to confirm against your fixture.
Replacement checklist
- ✓ Current-production ACE → ACE80X15S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACP Compact Cylinder ACP80X15S FAQ
At 0.5 MPa the 80 mm bore gives 2513.3 N push and 2356.2 N pull; at 0.7 MPa it reaches 3518.6 N push and 3298.7 N pull. The theoretical maximum is 512.6 kgf at 1.0 MPa. The cylinder is double acting, runs at 30-500 mm/s on air filtered to 40 um, and accepts 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure.
Yes, this model is no longer in production. The current direct is the ACE80X15 (swap the P for an E), which matches the same 80 mm bore, 15 mm stroke and force class; confirm the ISO 21287 mounting dimensions against your fixture before swapping. This S-coded unit carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be fitted for end-of-stroke sensing. The 1/4" port and M12x1.75 female rod thread carry over, and the fixed TPU bumper at both ends simply decelerates the piston - it never holds a load when air is lost.
Request a Quote for the ACE80X15S
Send us the quantity and destination. We confirm price, stock and lead time on the ACE80X15S replacement — usually within 7-8 hours.