This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACEJ12X160-10SB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACEJ12X160-10SB in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ12X160-10SB
The AirTAC Airtac ACPJ Adjustable Compact Cylinder ACPJ12X160-10SB is a double acting, adjustable stroke DIN-standard tight/compact air cylinder with a Ø12mm bore and 160mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ12X160-10SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ12 mm
- Stroke160 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM3×0.5
- StatusDiscontinued → ACEJ12X160-10SB
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ12X160-10SB
This is a double acting compact cylinder with an adjustable stroke: air drives the rod out and pulls it back, and a stop screw trims the extend stroke anywhere in a 10 mm window, so the usable range is 150-160 mm. The 12 mm bore delivers 56.5 N push and 42.4 N pull at 0.5 MPa, rising to 79.2 N push at 0.7 MPa, with a theoretical peak of 11.5 kgf at 1.0 MPa. The 160 mm stroke is longer than the 50 mm standard maximum for this bore, so it is a made-to-order build. Note that this model is discontinued; the current-production replacement is the ACEJ12X160, and buyers should confirm ISO 21287 mounting dimensions before swapping because the ACP series was built to a DIN standard.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it suits narrow fixtures and sliding guards. Because the S code is on this unit, the magnet is fitted and CMSE or DMSE reed or solid-state switches can be clamped straight onto the body for end-of-stroke signalling. The B code gives a male rod thread, and a fixed TPU bumper sits at each end. As a practical sizing check, plan on about 34 N of real work at 0.5 MPa, which lifts roughly 2.9 kg vertically with a 2:1 margin.
Airtac ACPJ Adjustable Compact Cylinder ACPJ12X160-10SB Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ12X160-10SB |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ12X160-10SB |
| Bore size | Ø12 mm |
| Stroke | 160 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M3×0.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 50 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ12X160-10SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø12mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 57 N | 42 N |
| 0.7 MPa | 79 N | 59 N |
| Max (@1.0 MPa) | 12 kgf | |
The ACEJ12X160-10SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ12X160-10SB
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 12 | Bore size in mm. |
| ×160 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ12X160-10SB Is Used
Small-part ejection from plastic moulds
The 56.5 N push at 0.5 MPa is enough to kick light moulded clips or caps off a core pin, and the 150-160 mm adjustable reach clears deep cavities.
Position-flagged slide gates on inspection stations
With the fitted magnet, CMSE or DMSE switches confirm gate open and closed on a vision or camera check line running at 30-500 mm/s.
Sample pusher in compact lab analysers
The short body, about 50% shorter than an ISO 15552 profile cylinder, slots into tight analyser chassis where a 160 mm reach is needed but panel space is not.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ12X160-10SB with the ACEJ12X160-10SB
Size both ways before committing: the 16 mm bore pushes 100.5 N at 0.5 MPa if 56.5 N feels marginal, while a 20 mm bore reaches 157.1 N for heavier clamping. If your part sits under 3 kg and 56.5 N covers it, this 12 mm unit keeps the envelope smallest. Remember the stop screw only shortens the extend stroke; it is a mechanical end stop, not a mid-stroke lock, so the piston will still drift if air is lost. Mounting options are FA/FB flange or LB foot, and the male rod thread suits knuckle brackets. For new designs, order the ACEJ12X160 instead, since this ACPJ version is discontinued.
Replacement checklist
- ✓ Current-production ACE → ACEJ12X160-10SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ12X160-10SB FAQ
At 0.5 MPa the 12 mm bore gives 56.5 N push and 42.4 N pull; at 0.7 MPa expect 79.2 N push and 59.4 N pull. The theoretical maximum is 11.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof rating, air filtered to 40 um, and rod speed 30-500 mm/s. For real work, budget about 34 N, which lifts roughly 2.9 kg vertically with a 2:1 margin.
The -10 code adds a stop screw that shortens the 160 mm extend stroke by up to 10 mm, giving a usable 150-160 mm range; it cannot lengthen the stroke past the ordered value. It is a mechanical end stop, not a load-holding brake, so the rod still drifts on air loss. This ACPJ is discontinued: the current drop-in is the ACEJ12X160, same bore, stroke and force class, but confirm the ISO 21287 mounting dimensions before swapping since the ACP was DIN-standard.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ12X160-10SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ12X160-10SB replacement — usually within 7-8 hours.