This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACEJ16X110-10S — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACEJ16X110-10S in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10S
The AirTAC Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10S is a double acting, adjustable stroke DIN-standard tight/compact air cylinder with a Ø16mm bore and 110mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ16X110-10S (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- StatusDiscontinued → ACEJ16X110-10S
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10S
This double acting compact cylinder trims its own extend stroke on site: the -10 stop screw shortens the ordered 110 mm stroke by up to 10 mm, giving a usable 100-110 mm range. It delivers 100.5 N push and 75.4 N pull at 0.5 MPa, rising to 140.7 N at 0.7 MPa, with a theoretical ceiling of 20.5 kgf at 1.0 MPa. The 110 mm stroke exceeds the 75 mm standard limit for the 16 mm bore, so it is a made-to-order build. Note that this model is discontinued - the current-production successor is the ACEJ16X110, so confirm ISO 21287 mounting dimensions before swapping.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into cramped pick-and-place gantries and test fixtures. Because the -S magnet is fitted on this unit, CMSE or DMSE reed and solid-state switches can be clamped directly to the hard-anodized aluminium body. In practice, plan for about 60 N of real work at 0.5 MPa, and expect it to lift roughly 5 kg vertically once a 2:1 margin is applied. The fixed TPU bumper at each end only decelerates the piston - it never locks a load, so the rod still drifts if air is lost.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10S Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10S |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ16X110-10S |
| Bore size | Ø16 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ16X110-10S (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 75 N |
| 0.7 MPa | 141 N | 106 N |
| Max (@1.0 MPa) | 21 kgf | |
The ACEJ16X110-10S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10S
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10S Is Used
Benchtop leak-test press
A 100-110 mm adjustable extend stroke clamps a small valve housing under about 60 N of working force at 0.5 MPa, and the fitted magnet signals clamp-complete to the tester via a DMSE switch.
Compact PCB tray ejector
The short body fits inside a tight SMT magazine where an ISO 15552 profile cylinder would overhang the frame, ejecting populated trays at 30-500 mm/s.
Carton flap tuck station
At 140.7 N push at 0.7 MPa the rod folds cardboard flaps on a semi-auto sealing line, with the 10 mm stop window dialled in to match carton height.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10S with the ACEJ16X110-10S
Size it against neighbours: the 12 mm bore gives 56.5 N push at 0.5 MPa, while stepping up to 20 mm buys 157.1 N - pick 16 mm when 100.5 N at 0.5 MPa covers the job with margin. The M4x0.7 female rod thread takes standard I/Y knuckles, and FA flange or LB foot mounts bolt to the same face. If you need position feedback, this -S version already carries the magnet for CMSE / DMSE switches. For new designs, order the ACEJ16X110 instead, since this ACPJ is discontinued.
Replacement checklist
- ✓ Current-production ACE → ACEJ16X110-10S
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10S FAQ
At 0.5 MPa it pushes 100.5 N and pulls 75.4 N; at 0.7 MPa that rises to 140.7 N push and 105.6 N pull; the theoretical maximum is 20.5 kgf at 1.0 MPa. The -10 code gives a 10 mm adjustment window, so the external stop screw trims the 110 mm extend stroke down to 100 mm. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, and the 110 mm stroke is a made-to-order length since the 16 mm bore normally tops out at 75 mm standard.
This ACPJ is no longer in production; the drop-in successor is the ACEJ16X110 in the same bore, stroke and force class. Because the ACP is DIN-standard, verify the ISO 21287 mounting dimensions before swapping. For sensing, this unit carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches mount straight onto the body; the fixed TPU bumpers at each end only soften the stroke ends and hold no load.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ16X110-10S
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ16X110-10S replacement — usually within 7-8 hours.