This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACEJ16X110-10SB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACEJ16X110-10SB in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10SB
The AirTAC Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10SB is a double acting, adjustable stroke DIN-standard tight/compact air cylinder with a Ø16mm bore and 110mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ16X110-10SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- StatusDiscontinued → ACEJ16X110-10SB
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10SB
This double acting ACPJ16X110-10SB is a DIN-standard compact cylinder with a 16 mm bore and a 110 mm stroke that an external stop screw trims by up to 10 mm, giving a usable extend range of 100-110 mm. At 0.5 MPa it pushes 100.5 N and pulls 75.4 N; at 0.7 MPa those rise to 140.7 N and 105.6 N, with a theoretical ceiling of 20.5 kgf at 1.0 MPa. The 110 mm stroke exceeds the 75 mm maximum standard stroke for bore 16, so this unit is made to order. Note that this model is discontinued: the current-production drop-in is the ACEJ16X110, and buyers should confirm ISO 21287 mounting dimensions before swapping.
The short ISO 21287-class body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight fixtures, guarding and gantries. Because the -S magnet is fitted on this version, CMSE or DMSE reed and solid-state switches can be clamped straight onto the hard-anodized aluminium body. The rod carries a male thread (B code) and the S45C hard-chrome rod runs at 30-500 mm/s between fixed TPU bumpers. As a rule of thumb, plan on about 60 N of real work at 0.5 MPa - roughly 6 kg of vertical lift with a 2:1 margin - rather than the full 100.5 N rating.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10SB Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10SB |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ16X110-10SB |
| Bore size | Ø16 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ16X110-10SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 75 N |
| 0.7 MPa | 141 N | 106 N |
| Max (@1.0 MPa) | 21 kgf | |
The ACEJ16X110-10SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10SB
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -10 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10SB Is Used
Small-parts ejection on assembly fixtures
The 100.5 N push at 0.5 MPa is enough to kick stamped terminals or plastic caps off a nest, and the 10 mm trim lets the operator dial the eject travel to 100-110 mm without re-plumbing.
Position-verified gate latch on a packaging line
With the -S magnet fitted, a DMSE switch confirms the rod is fully home on a 110 mm gate stroke, and the compact body fits inside guarding that a full-length profile cylinder cannot.
Sample pusher in a lab automation module
Lifts about 6 kg vertically with a 2:1 margin at 0.5 MPa, so it slides sample trays between stations at 30-500 mm/s inside a tight instrument chassis.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10SB with the ACEJ16X110-10SB
Size both ways before committing: the 12 mm bore gives 56.5 N push at 0.5 MPa if your load is lighter, while the 20 mm bore delivers 157.1 N if you need more force. The stop screw only shortens the extend stroke within the 10 mm window and acts as a mechanical end stop - on air loss the piston still drifts, so add a separate valve or lock if you must hold position. FA/FB flanges and LB feet bolt to the ISO 21287 face. Since this model is discontinued, order the ACEJ16X110 as the current replacement and verify mounting dimensions against the DIN-standard footprint first.
Replacement checklist
- ✓ Current-production ACE → ACEJ16X110-10SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-10SB FAQ
At 0.5 MPa it pushes 100.5 N and pulls 75.4 N; at 0.7 MPa it pushes 140.7 N and pulls 105.6 N; theoretical maximum is 20.5 kgf at 1.0 MPa. The -10 code gives a 10 mm adjustment window: the stop screw shortens the 110 mm extend stroke to any setting between 100 and 110 mm. Operating pressure is 0.15-1.0 MPa (22-145 psi) and speed is 30-500 mm/s.
Bore 16 tops out at 75 mm as a standard stroke, so this 110 mm version is a made-to-order item, and the whole ACPJ family is discontinued anyway. The current-production replacement is the ACEJ16X110 in the same bore, stroke and force class. Confirm the ISO 21287 mounting dimensions against your existing DIN-standard holes before swapping, and remember this unit carries the optional -S magnet plus a male rod thread.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ16X110-10SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ16X110-10SB replacement — usually within 7-8 hours.