This model is discontinued
AirTAC has phased out the MAL series. The drop-in replacement is ACEJ16X110-75SB — same bore, stroke, output force, port and mounting, so it fits the same application. Simply order the ACEJ16X110-75SB in place of this model. The ACE replacement is a current-production ISO 21287 compact cylinder in the same bore, stroke and force class, with a matching short body and the same mounting-accessory family, so it fits the same envelope. Confirm mounting-interface dimensions against the ACE datasheet before ordering.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75SB
The AirTAC Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75SB is a double acting, adjustable stroke DIN-standard tight/compact air cylinder with a Ø16mm bore and 110mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. This model is discontinued — the current-production replacement is the ACEJ16X110-75SB (ISO 21287 ACE), in the same bore, stroke and force class.
- BoreØ16 mm
- Stroke110 mm
- Port sizeM5×0.8
- Acting typeDouble acting, adjustable stroke
- Rod threadM4×0.7
- StatusDiscontinued → ACEJ16X110-75SB
About the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75SB
The ACPJ16X110-75SB is a double acting compact cylinder with an adjustable extend stroke: a stop screw trims the 110 mm stroke by up to 75 mm, giving a usable range of 35-110 mm on site. This -S version carries the optional magnet, so CMSE or DMSE reed and solid-state switches can be mounted for end-of-stroke signalling. The 110 mm stroke exceeds the 75 mm maximum standard stroke for bore 16, so it is a made-to-order build.
At 0.5 MPa the bore 16 piston delivers 100.5 N push and 75.4 N pull, rising to 140.7 N push at 0.7 MPa with a theoretical 20.5 kgf maximum at 1.0 MPa. In practice plan on roughly 60 N of real work at 0.5 MPa, which is about 6 kg - enough to lift roughly 5 kg vertically with a 2:1 margin. The short ISO 21287-class body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and the male (B code) rod thread suits I/Y knuckles. Discontinued: the current drop-in is ACEJ16X110 - confirm ISO 21287 mounting dimensions before swapping, since ACP is DIN-standard.
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75SB Technical Specifications
| Model | Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75SB |
|---|---|
| Series | ACPJ DIN compact cylinder (discontinued) |
| Replacement | ACEJ16X110-75SB |
| Bore size | Ø16 mm |
| Stroke | 110 mm |
| Acting type | Double acting, adjustable stroke |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACP datasheet (now discontinued). The ACEJ16X110-75SB (ISO 21287) carries the same bore/stroke/force class; confirm mounting-interface dimensions against the ACE datasheet before installation. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G.
Theoretical Output Force (Ø16mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 101 N | 75 N |
| 0.7 MPa | 141 N | 106 N |
| Max (@1.0 MPa) | 21 kgf | |
The ACEJ16X110-75SB produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75SB
| ACPJ | DIN compact cylinder (adjustable-stroke, discontinued). |
|---|---|
| 16 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| -75 | Adjustable stroke window (mm the extend stroke can be shortened on site). |
| S | Optional built-in magnet for sensor position sensing (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
Replacement mapping (swap P for E): ACP→ACE, ASP→ASE, ATP→ATE, ACPD→ACED, ACPJ→ACEJ. ACP-family: ACP (double acting), ASP / ATP (single acting push / pull), ACPD (double rod), ACPJ (adjustable stroke).
Where the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75SB Is Used
Fixture clamping on CNC jigs
The 35-110 mm adjustable range lets a machinist dial in clamp travel per fixture, with 100.5 N push at 0.5 MPa holding light aluminium parts during drilling.
Small-carton ejection on packing lines
Pushing 150 g cartons off a chute needs about 2 N; the 60 N usable force gives a wide margin, and the -S magnet with a DMSE switch confirms each eject.
Sample lift in lab automation
Lifting about 5 kg vertically with a 2:1 margin covers microplate stacks and sample trays, and the compact body fits inside benchtop enclosure frames.
Replacing the Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75SB with the ACEJ16X110-75SB
Size both ways: if 100.5 N push at 0.5 MPa is marginal, step up to bore 20 for 157.1 N; if the load is light, bore 12 gives 56.5 N at lower air use. The 75 mm window means the machine can be commissioned at a shorter extend stroke and opened up later without re-plumbing. Remember the stop screw is a mechanical end stop only - on air loss the piston drifts, so it is not a load-holding lock. FA/FB flanges and LB feet bolt to the ISO 21287 face. Note this model is discontinued; order ACEJ16X110 as the current-production equivalent.
Replacement checklist
- ✓ Current-production ACE → ACEJ16X110-75SB
- ✓ Same bore / stroke / force class
- ✓ Confirm ISO 21287 mounting dimensions
- ✓ Port/thread type (PT / G)
- ✓ Add -S for magnet if you need sensors
Airtac ACPJ Adjustable Compact Cylinder ACPJ16X110-75SB FAQ
Push is 100.5 N and pull 75.4 N at 0.5 MPa; at 0.7 MPa push is 140.7 N and pull 105.6 N, with a theoretical maximum of 20.5 kgf at 1.0 MPa. The -75 code gives a 75 mm adjustment window, so the extend stroke can be trimmed anywhere between 35 and 110 mm via the stop screw. Speed range is 30-500 mm/s and operating pressure 0.15-1.0 MPa (22-145 psi).
Yes - the S code in ACPJ16X110-75SB means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be mounted (models without -S have no magnet). The ACPJ family is discontinued; the current-production replacement is ACEJ16X110, same bore, stroke and force class. Confirm the ISO 21287 mounting dimensions before swapping, as ACP is DIN-standard.
Related AirTAC ACE Cylinders
Request a Quote for the ACEJ16X110-75SB
Send us the quantity and destination. We confirm price, stock and lead time on the ACEJ16X110-75SB replacement — usually within 7-8 hours.