
The AirTAC ACQ Ultra Thin Air Cylinder ACQ100X5 is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø100mm bore and 5mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ100X5 is a double-acting JIS compact cylinder engineered for space-constrained heavy force applications. It generates 3927 N of push force and 3524.8 N of pull force at 0.5 MPa. The short C-clip and riveted piston-to-rod body design significantly reduces overall axial length compared to round-body cylinders, saving valuable machine footprint.
This 100 mm bore unit features a 32 mm piston rod with a standard M20x2.5 female thread. It relies on a fixed NBR elastomer bumper at each end to absorb end-stop impact rather than an adjustable air cushion. The body includes magnetic-switch grooves, though this specific configuration ships without the internal magnet.
| Model | Airtac ACQ Ultra Thin Air Cylinder ACQ100X5 |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø100 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M20×2.5 female / M26×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 100 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 3927 N | 3525 N |
| 0.7 MPa | 5498 N | — |
| Max (@1.0 MPa) | 801 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 100 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Provides high 3927 N push force to eject dense plastic parts from injection molding machines within a very short 5 mm travel distance.
Executes short 5 mm staking and riveting operations on thick metal brackets, leveraging the 801 kgf maximum thrust for permanent mechanical joining.
Acts as a short-stroke mechanical stop or positioning block inside heavy press lines, where the compact JIS body prevents axial interference.
When sizing for heavy loads, compare this 100 mm bore (3927 N push at 0.5 MPa) against the smaller 80 mm bore (2513.2 N push) for lighter setups, or step up to the 125 mm bore (6135.9 N push) if your application demands greater thrust. Keep in mind a plain ACQ cylinder does not hold its position or load if air pressure is lost or the valve is centered; the piston will drift and the fixed bumper only decelerates it near the stroke end. For fail-safe holding, an external rod lock or pilot-operated check valve is required. To order this model, confirm the 100 mm bore, 5 mm stroke, PT3/8 port, no magnet, and female rod thread.
AirtacDistr lists every ACQ100 order code with its price on one page at https://airtacdistr.com/products/airtac-acq100-compact-air-cylinder
Quick checklist
The ACQ100X5 delivers a push force of 3927 N and a pull force of 3524.8 N at 0.5 MPa. At 0.7 MPa, the push force is 5497.8 N. The maximum push force is 801 kgf at 1.0 MPa. The operating speed range is 30-500 mm/s.
No, the ACQ100X5 uses a fixed NBR elastomer bumper at each end to absorb end-stop impact, which is not field-adjustable like a pneumatic air cushion. For high-speed or high-energy cycles, you should slow the approach speed or add an external shock absorber.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.