
The AirTAC ACQ140 Compact Cylinder ACQ140X50S is a genuine double-acting COMPACT (thin) air cylinder built to JIS dimensions, with a Ø140mm bore and 50mm stroke, PT3/8 air ports and a C-clip / riveted short body that saves mounting depth. Magnetic-switch slots around the body accept position sensors.
The AirTAC ACQ140X50S is a large-bore, double-acting single-rod JIS compact cylinder engineered for substantial actuation tasks, providing 7696.9 N of push force at 0.5 MPa. Its short C-clip and riveted body architecture significantly reduces axial mounting depth compared to conventional round-body units, saving valuable machine footprint in heavy-duty assemblies.
This 140mm bore variant integrates a built-in piston magnet for position sensing via AirTAC reed or electronic switches. End-of-travel deceleration relies on a fixed NBR elastomer bumper rather than an adjustable cushion, and the Ø32mm piston rod features a standard female M22x2.5 thread for direct load coupling.
| Model | Airtac ACQ140 Compact Cylinder ACQ140X50S |
|---|---|
| Series | ACQ JIS compact (thin) cylinder |
| Bore size | Ø140 mm |
| Stroke | 50 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod end thread | M22×2.5 female / M30×1.5 male (B) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACQ JIS compact-cylinder datasheet. Confirm against the product label before installation. Port thread: PT (standard); G and NPT available. Rod: female thread (blank) / male thread (B).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 7697 N | 7295 N |
| 0.7 MPa | 10776 N | — |
| Max (@1.0 MPa) | 1570 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| ACQ | JIS compact (thin) double-acting cylinder series. |
|---|---|
| 140 | Bore size in mm. |
| ×50 | Stroke length in mm. |
| S | Built-in magnet for magnetic-switch position sensing (omit = no magnet). |
| B | Male-thread piston rod (omit = female-thread rod). |
Thread: PT standard (G / NPT available). Related ACQ-family variants: ASQ (single-acting push), ATQ (single-acting pull), ACQD (double rod), ACQJ (adjustable stroke), TACQ (guided / non-rotating).
Drives heavy lower dies into position within a tight-footprint stamping press, utilizing the 10775.7 N extension force available at 0.7 MPa to seat thick steel blanks securely.
Ejects empty wooden pallets from a high-speed magazine dispenser, where the compact body length prevents interference with adjacent conveyor structures during retraction.
Applies massive hold-down pressure on structural steel riveting fixtures, using the integrated magnet to trigger an electronic switch exactly when full clamp force is achieved.
When sizing this large-bore model, consider stepping down to the Ø125 bore if your application requires less force, which yields 6135.9 N of push at 0.5 MPa. Alternatively, scaling up to the Ø160 bore provides 10053.1 N of push at 0.5 MPa for heavier demands. Remember that a plain ACQ cylinder will drift and cannot hold a load if air pressure drops or the valve is centered; installing an external rod lock or pilot-operated check valve is necessary for fail-safe position holding.
To order this specific unit correctly, confirm the 140mm bore, 50mm stroke, PT3/8 port, the S magnet option for sensing, and the standard female rod-end thread (M22x2.5).
AirtacDistr lists every ACQ140 order code with its price on one page at https://airtacdistr.com/products/airtac-acq140-compact-air-cylinder
Quick checklist
This double-acting cylinder delivers 7696.9 N push and 7294.8 N pull at 0.5 MPa, and 10775.7 N push at 0.7 MPa. The maximum push force is 1570 kgf at 1.0 MPa. It operates at 30-500 mm/s within a 0.15-1.0 MPa pressure range.
No, it uses a fixed NBR elastomer bumper at each end to absorb the end stop. Because it is not field-adjustable, you should slow the approach speed or mount an external shock absorber for high-energy impacts.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.