Airtac ACQJ125~160 Adjustable Compact Cylinder ACQJ140X10-10SB
The AirTAC Airtac ACQJ125~160 Adjustable Compact Cylinder ACQJ140X10-10SB is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø140mm bore and 10mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
- BoreØ140 mm
- Full stroke10 mm
- Port sizePT3/8
- Adjuster threadM27×2.0
About the Airtac ACQJ125~160 Adjustable Compact Cylinder ACQJ140X10-10SB
The ACQJ140X10-10SB is a big-bore JIS compact pneumatic cylinder featuring a double-acting single rod and an external extend stop. A threaded M27x2.0 mechanical adjuster paired with a lock nut lets you dial the forward end position down to a 0-10 mm usable range. The return stroke remains fixed at its original 10 mm length.
Because the piston area stays constant, output force matches a standard ACQ exactly, yielding 7696.9 N push at 0.5 MPa. This SB variant includes a male M30x1.5 rod end for direct load coupling, an integrated piston magnet for position sensing, and fixed NBR bumpers to absorb impact energy.
Airtac ACQJ125~160 Adjustable Compact Cylinder ACQJ140X10-10SB Technical Specifications
| Model | Airtac ACQJ125~160 Adjustable Compact Cylinder ACQJ140X10-10SB |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø140 mm |
| Full stroke | 10 mm |
| Adjuster thread | M27×2.0 |
| Port size | PT3/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M22×2.5 (F) / M30×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; the piston area — and therefore the force — is the same as a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
Theoretical Output Force (Ø140mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 7697 N | 7295 N |
| 0.7 MPa | 10776 N | — |
| Max (@1.0 MPa) | 1570 kgf | |
Force equals a standard ACQ of the same bore — the adjuster changes stroke length, not piston area. Actual usable force is lower due to friction; size with a safety margin.
Model Code: Airtac ACQJ125~160 Adjustable Compact Cylinder ACQJ140X10-10SB
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 140 | Bore size in mm. |
| ×10 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Where the Airtac ACQJ125~160 Adjustable Compact Cylinder ACQJ140X10-10SB Is Used
Press Tooling Setup
Dial in the exact clamping depth on heavy stamping presses during initial tool setup without machining custom spacer blocks.
Heavy Fixture Changeover
Adapt large machining clamps for different part families quickly by turning the external stop to shift the forward limit.
Assembly Press Trials
Establish the perfect bearing seating depth on automated lines by testing various extend endpoints safely before locking the nut.
Is the Airtac ACQJ125~160 Adjustable Compact Cylinder ACQJ140X10-10SB the Right Cylinder?
Selecting this 140 mm bore actuator provides massive thrust up to 1570 kgf at 1.0 MPa. If your application requires less force, stepping down to a 125 mm bore yields 6135.9 N push at 0.5 MPa, while moving up to the 160 mm option increases that figure to 10053.1 N. A fixed-stroke ACQ suffices if your forward position never changes, but this model is essential for trial positioning. Confirm your ordering code specifies the 10 mm stroke, 10 mm window, S magnet, and B male rod thread.
Quick checklist
- ✓ Need on-machine end-position tuning?
- ✓ Full stroke and adjust window (mm)
- ✓ Force at your working pressure
- ✓ Magnet (S) for sensors?
- ✓ Female (blank) or male (B) rod thread
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Lock the adjuster nut after setting the stop.
- check The stop limits the EXTEND stroke only.
- check Avoid side load on the short piston rod.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACQJ125~160 Adjustable Compact Cylinder ACQJ140X10-10SB FAQ
This 140 mm bore cylinder operates at 0.15-1.0 MPa and delivers 7696.9 N push and 7294.8 N pull at 0.5 MPa, or 10775.7 N push at 0.7 MPa, with a maximum push of 1570 kgf. The full stroke is 10 mm, but the external stop provides a usable extend range of 0-10 mm. The retract stroke is unaffected.
The external M27x2.0 threaded stop limits only the extend length, so force remains identical to a standard ACQ. It features fixed NBR bumpers rather than adjustable air cushions. Note that a plain compact cylinder drifts on air loss; for fail-safe load holding, install an external rod lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC ACQJ Compact Cylinders
Request a Quote for Airtac ACQJ125~160 Adjustable Compact Cylinder ACQJ140X10-10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.