
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X125-100B is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 125mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The ACQJ32X125-100B is a double-acting JIS compact cylinder featuring a 125 mm stroke and a male M14x1.5 rod end. It is a long-stroke made-to-order variant, exceeding the standard 100 mm maximum for this 32 mm bore. An external M12x1.25 threaded stop and lock nut limits the extend end position, yielding a usable forward range of 25 to 125 mm without swapping parts.
The retract stroke stays completely unaffected by the adjuster. Deceleration relies on fixed NBR elastomer bumpers at both ends, and while this specific unit ships without a magnet, the body retains sensor grooves for adding solid-state or reed switches if needed later.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X125-100B |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 125 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×125 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the exact clamping reach on a CNC lathe by turning the external stop, accommodating raw blanks of varying lengths without fabricating custom spacers.
Adjust the extend depth on the fly when a packaging line switches to a different box height, ensuring consistent pressing force without altering the PLC program.
Set precise trial end positions for pressing bearings on an automated assembly line, allowing operators to fine-tune insertion depth directly on the machine.
Choose this adjustable model if your fixture setup requires frequent trial end positions or product-changeover stops; a fixed-stroke ACQ suffices for static reach tasks. Confirm your ordering essentials: 32 mm bore, 125 mm full stroke, 100 mm window, male rod thread, and no magnet.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The 125 mm stroke can be shortened by up to 100 mm via the external stop, giving a usable extend range of 25-125 mm.
The M12x1.25 external stop alters only the extend stroke length, leaving piston area and force unchanged from a standard ACQ. Retract stroke is unaffected, and deceleration is handled by fixed NBR elastomer bumpers rather than adjustable air cushions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.