
The AirTAC ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X125-75 is a genuine double-acting COMPACT (JIS) cylinder with an EXTERNAL adjustable stop on the extend stroke — a Ø32mm bore and 125mm full stroke. Turn the stop to fine-tune the end position on the machine without changing parts.
The ACQJ32X125-75 is a double-acting, double-rod JIS compact cylinder featuring a 125mm stroke, which classifies it as a long-stroke made-to-order variant for the 32mm bore series. An external threaded stop with a lock nut restricts the extend travel, yielding a usable outward range of 50 to 125mm. The retract distance remains fixed at 125mm.
The unit incorporates fixed NBR elastomer bumpers at both ends rather than adjustable air cushions. It operates at pressures from 0.15 to 1.0MPa with a speed range of 30-500mm/s, and the body includes sensor grooves for adding reed or solid-state switches, though this specific SKU ships without a magnet.
| Model | Airtac ACQJ32~40 Adjustable Thin-Type Cylinder ACQJ32X125-75 |
|---|---|
| Series | ACQJ JIS compact adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Full stroke | 125 mm |
| Adjuster thread | M12×1.25 |
| Port size | PT1/8 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Rod thread | M8×1.25 (F) / M14×1.5 (B) |
Specifications follow the official AirTAC ACQJ datasheet. The adjustable stop shortens the EXTEND stroke only; ACQJ is double-rod, so push is lower than a standard ACQ of this bore. Adjustable window options: 10/20/30/40/50/75/100 mm.
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 302 N | 302 N |
| 0.7 MPa | 422 N | — |
| Max (@1.0 MPa) | 62 kgf | |
ACQJ is double-rod: the rear rod that carries the stroke adjuster passes through the rear cover, so both piston faces lose rod area. Push is shown at the annular-area value (conservative), lower than a single-rod ACQ push of the same bore. Actual usable force is lower due to friction; size with a safety margin.
| ACQJ | JIS compact double-acting ADJUSTABLE-STROKE cylinder series. |
|---|---|
| 32 | Bore size in mm. |
| ×125 | Full stroke length in mm. |
| -0 | Adjustable window in mm (extend stroke can be shortened by up to this). |
| S / B | Magnet (S) / male-thread rod (B); omit for none / female thread. |
Thread: PT standard (G / NPT available). Related: ACQ (fixed stroke), ACQD (double rod), TACQ (guided / non-rotating).
Dial in the extend stop between 50 and 125mm when swapping press die sets, avoiding the need to machine custom spacers for each new product family.
Adjust the pusher stroke on-site to deflect different carton widths on a packaging line, using the lock nut to secure the exact end position.
Fine-tune the clamping reach on an automated assembly fixture during product changeover, testing trial end positions before locking the mechanism down.
If your machine only needs a fixed 125mm outward movement without on-machine tuning, a standard ACQ32X125 is simpler and sufficient. If you require position sensing, select the -S magnet option. Confirm your ordering essentials: 32mm bore, 125mm full stroke, 75mm window, female M8x1.25 rod end, PT1/8 port, and the M12x1.25 external adjuster thread. Note that a plain compact cylinder will drift if air is lost; use an external rod lock for fail-safe load holding.
AirtacDistr lists every ACQJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-acqj32-adjustable-cylinder
Quick checklist
The full stroke is 125mm with a 75mm window, allowing the extend end to be adjusted within a 50-125mm range. The external adjuster uses an M12x1.25 thread.
The external stop limits stroke length only; it does not change the piston area, so force remains identical to a standard ACQ. Deceleration is handled by fixed NBR elastomer bumpers at both ends. For high kinetic energy loads, an external shock absorber should be added since there is no adjustable air cushion.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.